| Engine |
| Manufacture and Model |
John Deere PowerTech 6081H
certified to EPA Tier 2 emissions |
|
Rated Speed |
2,000 rpm |
Engine Power
Gears 1-2 (6WD on)
Gears 3-5 (6WD on)
Gears 6-7 (6WD on)
Gear 8 (6WD off) |
205 net hp (153 kW)
230 net hp (172 kW)
245 net hp (183 kW)
235 net hp (175 kW) |
|
Aspiration |
turbocharged with waste-gate boost
pressure regulation
and air-to-air aftercooler |
|
Number of Cylinders |
6 |
|
Displacement |
494 cu. in. (8.1 L) |
Net Torque @ 1,000 rpm
Gears 1-2
Gear 3
Gears 4-5
Gears 6-8 |
731 lb. ft. (991 Nm) @ 66% net torque rise
793 lb. ft. (1075 Nm) @ 57% net torque rise
835 lb. ft. (1132 Nm) @ 52% net torque rise
913 lb. ft. (1238 Nm) @ 61% net torque rise |
|
Net Torque @ 1,000 rpm |
6WD off |
6WD on |
Gears 1-2
Gear 3
Gears 4-5
Gears 6-7
Gear 8 |
793 lb ft (1075 Nm) @ 57%
net torque rise
835 lb ft (1132 Nm) @ 57% net torque rise
872 lb ft (1182 Nm) @ 57% net torque rise
942 lb ft (1277 Nm) @ 57% net torque rise
942 lb ft (1277 Nm) @ 57% net torque rise |
835 lb ft (1132 Nm) @ 57%
net torque rise
896 lb ft (1215 Nm) @ 57% net torque rise
896 lb ft (1215 Nm) @ 57% net torque rise
961 lb ft (1303 Nm) @ 57% net torque rise
NA |
|
Lubrication |
pressure system with full-flow
filter and cooler |
|
Air Cleaner with Restriction
Indicator |
dual element, dry, with tangential
unloader |
|
Electrical System |
24 volt with 100-amp alternator |
|
Batteries (two 12 volt) |
1,400 cold-cranking amps, 440-min.
reserve capacity |
| Operating
Weights |
|
SAE Operating Weights with
Standard Equipment |
Front
Rear
Total |
10,172 lb. (4613 kg)
26,040 lb (11 812 kg)
36,210 lb. (16 421 kg) |
|
Typical Operating Weights with
Front Push Block and Ripper |
Front
Rear
Total |
11,600 lb. (5262 kg)
30,640 lb. (13 897 kg)
42,240 lb. (19 159 kg) |
|
Maximum Operating Weight (total) |
48,620 lb. (22 045 kg) |
| Transmission |
|
Type |
direct-drive John Deere Powershift
Plus
modulated shift on-the-go, Event Based Shifiting (EBS) |
Travel Speeds
Shift Lever Position 1
Shift Lever Position 2
Shift Lever Position 3
Shift Lever Position 4
Shift Lever Position 5
Shift Lever Position 6
Shift Lever Position 7
Shift Lever Position 8 |
Forward and Reverse @
2,000 rpm with 14.00-24 tires
2.3 mph (3.6 km/h)
3.3 mph (5.2 km/h)
4.5 mph (7.2 km/h)
6.3 mph (10.0 km/h)
9.5 mph (15.2 km/h)
13.3 mph (21.3 km/h)
18.4 mph (29.4 km/h)
25.7 mph (41.1 km/h) |
| Blade Function |
|
|
All-hydraulic,
industry preferred hand-lever placement of blade
function controls;
includes float position; easy conversion from two-hand
to one-hand blade-lift control;
sever blade-lift arm positions |
Blade Range
Lift Above Ground
Blade Side Shift, Right or Left
Shoulder Reach Outside Wheels
Right
Left
Pitch at Ground Level |
17.2 in. (437 mm)
26.9 in. (680 mm)
91 in. (2.31 m)
91.5 in. (2.32 m)
42 degrees forward / 5 degrees back |
| Moldboard |
|
Type |
high-strength, pre-stressed, wear-resistant,
high carbon steel, equipped with replaceable side-shift
wear inserts |
|
Length |
14 ft. (4.3 m) |
|
Height |
27 in. (686 mm) |
|
Thickness |
1.0 in. (25 mm) |
| Capacities |
|
Fuel Tank |
106 gal. (401.2 L) |
|
Cooling System |
13 gal. (49.2 L) |
|
Engine Lubrication, Including
Filter |
7.5 gal. (28. L) |
|
Transmission |
6 gal. (22.7 L) |
|
Differential Housing |
9.5 gal. (36 L) |
|
Tandem Housing (each) |
20 gal. (75.7 L) |
|
Circle Gearbox |
1.5 gal. (5.7 L) |
|
Hydraulic Reservoir |
14 gal. (53 L) |
|
