John Deere 824J Wheel Loader Specs
 
Engine
Type John Deere PowerTech 6125H
complies with EPA Tier 3 regulations
Cylinders 6
Valves per Cylinder 4
Displacement 766 cu. in. (12.5 L)
Net Peak Power (ISO9249) 316 hp (236 kW) @ 1,500 rpm
Net Peak Torque (ISO9249) 1,115 lb. ft. (1510 Nm) @ 1,200 rpm
Aspiration turbocharged and charge air cooled
Air Cleaner dual element dry type; restriction indicator in cab
Fan Drive belt driven, fan forward of coolers
Electrical System 24 volt with 80-amp alternator
Batteries (two 12 volt) 1,400 CCA; reserve capacity: 200 min.

 

Transmission
Travel Speeds
        Gear 1
        Gear 2
        Gear 3
        Gear 4		 Forward
4.6 mph (7.4 km/h)
8.6 mph (13.9 km/h)
13.1 mph (21.2 km/h)
24.5 mph (39.5 km/h)		 Reverse
4.6 mph (7.4 km/h)
8.6 mph (13.9 km/h)
19.3 mph (31.0 km/h)
 

 

Refill Capacities
Fuel Tank (with ground level fueling) 122 gal. (462 L)
Cooling System 40 qt. (38 L)
Engine Oil, Including Filter 40 qt. (38 L)
Transmission, Including Filter 30 qt. (28 L)
Differential (front and rear, each axle) 49 qt. (46 L)
Hydraulic Reservoir and Filters 38 gal. (144 L)
Wet-Disc Parking Brake 20 oz. (600 mL)

 

Hydraulic System / Steering    
Maximum Lift Capacity 6.0 cu. yd. (4.6m3) general-purpose bucket with bolt-on cutting edge 5.75 cu. yd. (4.4m3) general-purpose bucket with bolt-on cutting edge
     Lift at Ground Level
     Lift at Maximum Height		 44,634 lb (20 242 kg)
26,266 lb (11 912 kg)		 43,196 lb (19 590 kg)
26,105 lb (11 839 kg)

 
Dimensions (with Pin On Bucket) Standard Z-Bar High-Lift Z Bar
A) Height to Top of Cab 11 ft. 7 in. (3520 mm) 11 ft. 7 in. (3520 mm)
B) Height to Top of Exhaust 10 ft. 2 in. (3100 mm) 10 ft. 2 in. (3100 mm)
C) Ground Clearance 18.3 in. (465 mm) 18.3 in. (465 mm)
D) Length from Centerline to Front Axle 67 in. (1700 mm) 67 in. (1700 mm)
E) Wheelbase 134 in. (3400 mm) 134 in. (3400 mm)
F) Dump Clearance see below see below
G) Height to Hinge Pin, Fully Raised 14 ft. 10 in. (4508 mm) 15 ft. 11 in. (4848 mm)
H) Dump Reach see below see below
I) Maximum Digging Depth 3.2 in. (82 mm) 3.2 in. (82 mm)
J) Overall Length see below see below
K) Maximum Rollback at Ground Level 45 degrees 42 degrees
L) Maximum Rollback, Boom Fully Raised 55 degrees 55 degrees
M) Maximum Bucket Angle, Fully Raised 50 degrees 50 degrees

 
Dimensions (with Quick-Coupler and Bucket)
A) Dump Clearance see below
B) Dump Reach see below
C) Maximum Digging Depth 3.7 in. (94 mm)
D) Height to Hinge Pin, Fully Raised 14 ft. 10 in. (4508 mm)
E) Overall Length see below
F) Maximum Rollback, Boom Fully Raised 52 degrees
G) Maximum Bucket Discharge Angle, Fully Raised 45 degrees
H) Maximum Rollback at Ground Level 45 degrees

 

Standard Z-Bar Information with Pin On Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 6.0 cu. yd. (4.6 m3) 5.75 cu. yd. (4.4 m3)
Capacity, Struck SAE 4.25 cu. yd. (4.0 m3) 4.9 cu. yd. (3.74 m3)
Bucket Weight 5,768 lb (2616 kg) 5,411 lb (2454 kg)
Bucket Width 128.9 in. (3275 mm) 128.9 in. (3275 mm)
Breakout Force, SAE J732C 42,916 lb (19 463 kg) 42,146 lb (19 114 kg)
Tipping Load, Straight 42,523 lb (19 285 kg) 41,798 lb (18 956 kg)
Tipping Load, 35-Degree Turn, SAE 37,046 lb (16 801 kg) 36,438 lb (16 525 kg)
Tipping Load, 40-Degree Full Turn, SAE 35,708 lb (16 194 kg) 35,126 lb (15 930 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 80.8 in. (2052 mm) 74.7 in. (1898 mm)
Reach, 45-Degree Discharge, Full Height 48.9 in. (1243 mm) 49.6 in. (1259 mm)
Dump Clearance, 45-Degree  Full Height 127.2 in. (3230 mm) 126 in. (3201 mm)
Overall Length, Bucket on Ground 29 ft. 3 in. (8906 mm) 29 ft. 6 in. (9001 mm)
Loader Clearance Circle, Bucket in Carry Position 45 ft. 9 in. (13 940 mm) 45 ft. 10 in. (13 964 mm)
Operating Weight 57,374 lb (26 020 kg) 59,993 lb (25 847 kg)

 

Standard Z-Bar Information with Quick-Coupler and Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 5.5 cu. yd. (4.2 m3) 5.25 cu. yd. (4.0 m3)
Capacity, Struck SAE 5.0 cu. yd. (3.8 m3) 4.75 cu. yd. (3.6 m3)
Bucket Weight 6,798 lb (3083 kg) 6,681 lb (3030 kg)
Bucket Width 120 in. (3048 mm) 120 in. (3048 mm)
Breakout Force, SAE J732C 37,963 lb (17 217 kg) 39,280 lb (17 814 kg)
Tipping Load, Straight 41,161 lb (18 667 kg) 41,445 lb (18 796 kg)
Tipping Load, 40-Degree Full Turn, SAE 34,451 lb (15 624 kg) 34,709 lb (15 741 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 82.9 in. (2105 mm) 82 in. (2083 mm)
Reach, 45-Degree Discharge, Full Height 53.9 in. (1369 mm) 52.4 in. (1330 mm)
Dump Clearance, 45-Degree  Full Height 122.4 in. (3109 mm) 123.7 in. (3141 mm)
Overall Length, Bucket on Ground 29 ft. 10 in. (9089 mm) 29 ft. 8 in. (9039 mm)
Loader Clearance Circle, Bucket in Carry Position 45 ft. 5 in. (13 840 mm) 45 ft. 4 in. (13 812 mm)
Operating Weight 58,404 lb (26 487 kg) 58,285 lb (26 433 kg)

 

High-Lift Z-Bar Pin-On Type Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 5.25 cu. yd. (4.0 m3) 5.75 cu. yd. (4.4 m3)
Capacity, Struck SAE 4.5 cu. yd. (3.4 m3) 4.9 cu. yd. (3.74 m3)
Bucket Weight 5,027 lb (2280 kg) 5,411 lb (2454 kg)
Bucket Width 119.7 in. (3040 mm) 128.9 in. (3275 mm)
Breakout Force, SAE J732C 45,258 lb (20 525 kg) 39,500 lb (17 914 kg)
Tipping Load, Straight 36,354 lb (16 487 kg) 35,260 lb (15 991 kg)
Tipping Load, 35-Degree Turn, SAE 31,622 lb (14 341 kg) 30,619 lb (13 886 kg)
Tipping Load, 40-Degree Full Turn, SAE 30,460 lb (13 814 kg) 29,479 lb (13 369 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 94.9 in. (2410 mm) 93 in. (2362 mm)
Reach, 45-Degree Discharge, Full Height 53.7 in. (1363 mm) 59.8 in. (1518 mm)
Dump Clearance, 45-Degree  Full Height 144 in. (3658 mm) 140 in. (3555 mm)
Overall Length, Bucket on Ground 30 ft. 5 in. (9271 mm) 31 ft. 0 in. (9450 mm)
Loader Clearance Circle, Bucket in Carry Position 46 ft. 5 in. (14 152 mm) 47 ft. 6 in. (14 469 mm)
Operating Weight 57,304 lb (25 988 kg) 57,687 lb (26 162 kg)
 
Click Here to download full brochure
 

 

Contact Us    Site Map