| Engine |
| Manufacture and Model |
John Deere PowerTech 6090H
certified to EPA Tier 3 emissions |
|
Rated Speed |
2,100 rpm |
Engine Power
Gear 1 (6WD on)
Gear 2 (6WD on)
Gear 3 (6WD on)
Gear 4 (6WD on)
Gear 5 (6WD on)
Gear 6 (6WD on)
Gear 7 (6WD on)
Gear 8 |
194 net hp (145 kW)
198 net hp (148 kW)
220 net hp (164 kW)
220 net hp (164 kW)
234 net hp (174 kW)
240 net hp (179 kW)
245 net hp (183 kW)
235 net hp (175 kW) |
|
Aspiration |
turbocharged, charge air cooled |
|
Number of Cylinders |
6 |
|
Displacement |
494 cu. in. (8.1 L) |
|
Net Torque @ 900 rpm |
950 lb. ft. (1288 Nm) @ 55% net torque rise |
|
Lubrication |
full-flow spin-on filter and integral cooler |
|
Air Cleaner with Restriction
Indicator |
dual element, dry |
|
Electrical System |
24 volt with 100-amp alternator |
|
Batteries |
1,400 cold-cranking amps, 440-min.
reserve capacity |
| Operating
Weights |
|
SAE Operating Weights with
Standard Equipment |
Front
Rear
Total |
10,780 lb. (4890 kg)
26,140 lb (11 857 kg)
36,920 lb. (16 747 kg) |
|
Typical Operating Weights with
Front Push Block and Ripper |
Front
Rear
Total |
13,618 lb. (6177 kg)
29,602 lb. (13 427 kg)
43,220 lb. (19 604 kg) |
|
Maximum Operating Weight (total) |
48,000 lb. (21 772 kg) |
| Transmission |
|
Type |
direct-drive John Deere Powershift
Plus
modulated shift on-the-go, Event Based Shifiting (EBS) |
Travel Speeds
Shift Lever Position 1
Shift Lever Position 2
Shift Lever Position 3
Shift Lever Position 4
Shift Lever Position 5
Shift Lever Position 6
Shift Lever Position 7
Shift Lever Position 8 |
Forward and Reverse @
2,180 rpm with 14.00-24 tires
2.4 mph (3.9 km/h)
3.4 mph (5.4 km/h)
4.8 mph (7.7 km/h)
6.8 mph (10.9 km/h)
10.1 mph (16.3 km/h)
14.3 mph (23.0 km/h)
19.9 mph (32.1 km/h)
28.1 mph (45.2 km/h) |
| Blade Function |
|
|
All-hydraulic,
industry standard lever placement of blade
function controls;
includes float position; 7 discrete saddle positions |
Blade Range
Lift Above Ground
Blade Side Shift, Right or Left
Shoulder Reach Outside Wheels
Pitch at Ground Level |
19.3 in. (490 mm)
26.9 in. (680 mm)
6 ft. 10 in. (2083 mm)
42 degrees forward / 5 degrees back |
| Moldboard |
|
Type |
high-strength, pre-stressed, wear-resistant,
high carbon steel, equipped with replaceable side-shift
wear inserts |
|
Length |
12 ft. (3.66 m) |
|
Height |
24 in. (610 mm) |
|
Thickness |
0.88 in. (22 mm) |
| Capacities |
|
Fuel Tank |
110 gal. (416.4 L) |
|
Cooling System |
13 gal. (49.2 L) |
|
Engine Lubrication, Including
Filter |
7.1 gal. (26.9 L) |
|
Transmission |
6 gal. (22.7 L) |
|
Differential Housing |
9.5 gal. (36 L) |
|
Tandem Housing (each) |
20 gal. (75.7 L) |
|
Circle Gearbox |
1.5 gal. (5.7 L) |
|
Hydraulic Reservoir |
14 gal. (53 L) |
|
