| Engine |
| Manufacture and Model |
John Deere PowerTech 6090H
certified to EPA Tier 3 emissions |
|
Rated Speed |
2,100 rpm |
Engine Power
Gear 1
Gear 2
Gear 3
Gear 4
Gear 5
Gear 6
Gear 7
Gear 8 |
165 net hp (123 kW)
167 net hp (125 kW)
184 net hp (137 kW)
198 net hp (148 kW)
210 net hp (157 kW)
220 net hp (164 kW)
225 net hp (168 kW)
230 net hp (172 kW) |
|
Aspiration |
turbocharged, charge air cooled |
|
Number of Cylinders |
6 |
|
Displacement |
548 cu. in. (9.0 L) |
|
Net Torque @ 900 rpm |
905 lb. ft. (1227 Nm) @ 63% net torque rise |
|
Lubrication |
full-flow spin-on filter and integral cooler |
|
Air Cleaner with Restriction
Indicator |
dual element, dry |
|
Electrical System |
24 volt with 100-amp alternator |
|
Batteries |
1,400 cold-cranking amps, 440-min.
reserve capacity |
| Operating
Weights |
|
SAE Operating Weights with
Standard Equipment |
Front
Rear
Total |
9,510 lb. (4314 kg)
25,220 lb (11 440 kg)
34,730 lb. (15 753 kg) |
|
Typical Operating Weights with
Front Push Block and Ripper |
Front
Rear
Total |
12,358 lb. (5605 kg)
29,047 lb. (13 175 kg)
41,405 lb. (18 781 kg) |
|
Maximum Operating Weight (total) |
48,000 lb. (21 772 kg) |
| Transmission |
|
Type |
direct-drive John Deere Powershift
Plus
modulated shift on-the-go, Event Based Shifiting (EBS) |
Travel Speeds
Shift Lever Position 1
Shift Lever Position 2
Shift Lever Position 3
Shift Lever Position 4
Shift Lever Position 5
Shift Lever Position 6
Shift Lever Position 7
Shift Lever Position 8 |
Forward and Reverse @
2,180 rpm with 14.00-24 tires
2.4 mph (3.9 km/h)
3.4 mph (5.4 km/h)
4.8 mph (7.7 km/h)
6.8 mph (10.9 km/h)
10.1 mph (16.3 km/h)
14.3 mph (23.0 km/h)
19.9 mph (32.1 km/h)
28.1 mph (45.2 km/h) |
| Blade Function |
|
|
All-hydraulic,
industry standard lever placement of blade
function controls;
includes float position; 7 discrete saddle positions |
Blade Range
Lift Above Ground
Blade Side Shift, Right or Left
Shoulder Reach Outside Wheels
Pitch at Ground Level |
19.3 in. (490 mm)
26.9 in. (680 mm)
6 ft. 10 in. (2083 mm)
42 degrees forward / 5 degrees back |
| Moldboard |
|
Type |
high-strength, pre-stressed, wear-resistant,
high carbon steel, equipped with replaceable side-shift
wear inserts |
|
Length |
12 ft. (3.66 m) |
|
Height |
24 in. (610 mm) |
|
Thickness |
0.88 in. (22 mm) |
| Capacities |
|
Fuel Tank |
110 gal. (416.4 L) |
|
Cooling System |
13 gal. (49.2 L) |
|
Engine Lubrication, Including
Filter |
7.1 gal. (26.9 L) |
|
Transmission |
6 gal. (22.7 L) |
|
Differential Housing |
9.5 gal. (36 L) |
|
Tandem Housing (each) |
20 gal. (75.7 L) |
|
Circle Gearbox |
1.5 gal. (5.7 L) |
|
Hydraulic Reservoir |
14 gal. (53 L) |
|
