John Deere 750J Dozer Specs
 
Engine 750J 750J LT 750J WT 750J LGP
Manufacture and Model John Deere PowerTech 6068H
Non-Road Emission Standards certified to EPA Tier 3 emissions
Cylinders 6
Displacement 414 cu. in. (6.8 L)
Net Peak Power (ISO9249) 145 hp (108 kW)
 @ 2,100 rpm		 145 hp (108 kW)
 @ 2,100 rpm		 145 hp (108 kW)
 @ 2,100 rpm		 155 hp (116 kW)
 @ 2,100 rpm
Net Peak Torque (ISO9249) 494 lb ft (670 Nm)
 @ 1,400 rpm		 494 lb ft (670 Nm)
 @ 1,400 rpm		 494 lb ft (670 Nm)
 @ 1,400 rpm		 548 lb ft (742 Nm)
 @ 1,400 rpm
Aspiration turbocharger air-to-air
 aftercooler		 air-to-air
 aftercooler		 air-to-air
 aftercooler
Air Cleaner dual-stage dry type with safety element, precleaner, and
underhood restriction indicator

 

Transmission      
Travel Speeds 6.3 mph (10.1 km/h)

 

Capacities      
Fuel Tank 98 gal. (371 L)
Cooling System with Recovery Tank 5.7 gal. (21.6 L)
Engine Oil with Filter 7 gal. (26.5 L)
Transmission Reservoir with Filter 28 gal (105.6 L)
Hydraulic Reservoir and Filter 28 gal. (105.6 L)

 

Undercarriage 750J 750J LT 750J WT 750J LGP
Tracks track frame with front and rear track guides and sprocket guard; John Deere Dura-Trax features deep-heat-treated, sealed and lubricated track links and through-hardened, sealed, and lubricated rollers for maximum wear resistance; sprockets are segmented
Blade Type PAT PAT Outside Dozer PAT
Track Gauge (standard) 6 ft 2 in.
(1880 mm)		 6 ft 2 in.
(1880 mm)		 7 ft 0 in.
(2134 mm)		 7 ft 0 in.
(2134 mm)
Grouser Width (closed center, single bar) 22 in (559 mm) 22 in (559 mm) 34 in (864 mm) 34 in (864 mm)
Chain sealed and lubricated
Shoes (each side) 40 45 40 45
Track Rollers (single flange, each side) 7 8 7 8
Track Length on Ground 8 ft 6 in
(2591 mm)		 10 ft 1 in
(3073 mm)		 8 ft 6 in
(2591 mm)		 10 ft 1 in
(3073 mm)
Ground Contact Area 4,488 sq. in.
(28 955 cm2)		 5,324 sq. in.
(34 348 cm2)		 6,936 sq. in.
(44 748 cm2)		 8,228 sq. in.
(53 084 cm2)
Ground Pressure 7.24 psi
(49.9 kPa)		 6.45 psi
(44.5 kPa)		 5.24 psi
(36.1 kPa)		 4.45 psi
(30.7 kPa)
Track Pitch        

 

Operating Weights 750J 750J LT 750J WT 750J LGP
Blade Type PAT PAT Outside Dozer PAT
Base Weight 32,585 lb
(14 778 kg)		 34,395 lb
(15 599 kg)		 36,425 lb
(16 519 kg)		 36,725 lb
(16 655 kg)

 

Blade Capacties 750J 750J LT 750J WT 750J LGP
PAT 130 in (3295 mm)
4.23 cu yd (3.23m3)		 130 in (3295 mm)
4.23 cu yd (3.23m3)		   156 in (3962 mm)
4.98 cu yd (3.81m3)
Semi-U     148 in (3759 mm)
5.90 cu yd (4.51m3)		  
Straight     150 in (3810 mm)
5.25 cu yd (4.01m3)		  

 

 
Machine Dimensions 750J 750J LT 750J WT 750J LGP
Blade Type PAT PAT Outside Dozer PAT
A) Overall Height to Roof
     Overall Height to Exhaust Stack		 10 ft 2 in (3095 mm)
9 ft 11 in (3020 mm)		 10 ft 2 in (3095 mm)
9 ft 11 in (3020 mm)		 10 ft 2 in (3095 mm)
9 ft 11 in (3020 mm)		 10 ft 2 in (3095 mm)
9 ft 11 in (3020 mm)
B) Tread Depth with Single Bar Grouser
        Moderate Duty
        Extreme Duty
2.2 in (56 mm)
2.7 in (68 mm)
2.2 in (56 mm)
2.7 in (68 mm)
2.2 in (56 mm)
2.7 in (68 mm)
2.2 in (56 mm)
2.7 in (68 mm)
C) Ground Clearance with Grousers
(excludes grouser height)		 14 in (356.9 mm) 14 in (356.9 mm) 14 in (356.9 mm) 14 in (356.9 mm)
D) Blade Width 10 ft 9.75 in
(3296 mm)		 10 ft 9.75 in
(3296 mm)		 12 ft 4 in
(3759 mm)		 13 ft 0 in
(3962 mm)
E) Blade Height 3 ft 11 in
(1194 mm)		 3 ft 11 in
(1194 mm)		 3 ft 10.1 in
(1170 mm)		 3 ft 10.1 in
(1170 mm)
F) Blade Lift Height 3 ft 2.5 in
(979 mm)		 3 ft 4.3 in
(1025 mm)		 3 ft 5.3 in
(1050 mm)		 3 ft 4.3 in
(1025 mm)
G) Blade Digging Depth 24.4 in
(620 mm)		 25.6 in
(650 mm)		 22.6 in
(575 mm)		 25.6 in
(650 mm)
H) Blade Tilt (uses tilt jack) 17.2 in
(437 mm)		 17.2 in
(437 mm)		 25.7 in
(653 mm)		 20.6 in
(524 mm)
I) Overall Length with Blade 16 ft 4.5 in
(4990 mm)		 17 ft 4.5 in
(5300 mm)		 17 ft 1 in
(5205 mm)		 17 ft 4.5 in
(5300 mm)
J) Overall Width with Blade Angled 9 ft 10.9 in
(3020 mm)		 9 ft 10.9 in
(3020 mm)		 NA 11 ft 10.9 in
(3631 mm)
K) Blade Angle 23.5 deg 23.5 deg NA 23.5 deg
L) Cut Reach 4.3 in (108 mm) 4.3 in (108 mm) NA 3.3 in (84 mm)
M) Width Over Track 8 ft 0 in
(2438 mm)		 8 ft 0 in
(2438 mm)		 9 ft 10 in
(2997 mm)		 9 ft 10 in
(2997 mm)
N) Cast Reach 8.8 in (224 mm) 8.8 in (224 mm) NA 11.7 in (297 mm)
O) Cutting Edge Angle 55.2 - 60.1 deg 55.2 - 60.1 deg 50.5 - 60 deg 552. - 60.1 deg
 
Click Here to download full brochure
 

 

Contact Us    Site Map