John Deere 724J Wheel Loader Specs
 
Engine
Type John Deere PowerTech 6081H
complies with EPA Tier 3 regulations
Cylinders 6
Valves per Cylinder 2
Displacement 496 cu. in. (8.1 L)
Net Peak Power (ISO9249) 250 hp (186 kW) @ 1,800 rpm
Net Peak Torque (ISO9249) 765 lb. ft. (1040 Nm) @ 1,300 rpm
Aspiration turbocharged and charge air cooled
Air Cleaner dual element dry type; restriction indicator in cab
Fan Drive hydraulically driven, proportionally controlled, fan aft of coolers
Electrical System 24 volt with 80-amp alternator
Batteries (two 12 volt) 1,400 CCA; reserve capacity: 200 min.

 

Transmission
Travel Speeds
        Gear 1
        Gear 2
        Gear 3
        Gear 4		 Forward
4.6 mph (7.4 km/h)
7.6 mph (12.2 km/h)
14.7 mph (23.6 km/h)
22.0 mph (35.4 km/h)		 Reverse
4.9 mph (7.9 km/h)
8.0 mph (12.8 km/h)
15.5 mph (24.9 km/h)
 

 

Refill Capacities
Fuel Tank (with ground level fueling) 100 gal. (379 L)
Cooling System 32 qt. (31 L)
Engine Oil, Including Filter 26 qt. (25 L)
Transmission, Including Filter 27 qt. (26 L)
Differential (front and rear, each axle) 23 qt. (22 L)
Hydraulic Reservoir and Filters 31 gal. (117 L)
Wet-Disc Parking Brake 20 oz. (600 mL)

 

Hydraulic System / Steering    
Maximum Lift Capacity 4.75 cu. yd. (3.6m3) general-purpose bucket with bolt-on cutting edge 4.25 cu. yd. (3.3m3) general-purpose bucket with bolt-on cutting edge
     Lift at Ground Level
     Lift at Maximum Height		 30,881 lb (14 005 kg)
19,830 lb (8993 kg)		 30,764 lb (13 952 kg)
16,899 lb (7664 kg)

 
Dimensions (with Pin On Bucket) Standard Z-Bar High-Lift Z Bar
A) Height to Top of Cab 11 ft. 2 in. (3412 mm) 11 ft. 2 in. (3412 mm)
B) Height to Top of Exhaust 11 ft. 0 in. (3362 mm) 11 ft. 0 in. (3362 mm)
C) Ground Clearance 17.8 in. (453 mm) 17.8 in. (453 mm)
D) Length from Centerline to Front Axle 63 in. (1600 mm) 63 in. (1600 mm)
E) Wheelbase 126 in. (3200 mm) 126 in. (3200 mm)
F) Dump Clearance see below see below
G) Height to Hinge Pin, Fully Raised 13 ft. 7 in. (4136 mm) 15 ft. 0 in. (4562 mm)
H) Dump Reach see below see below
I) Maximum Digging Depth 2.8 in. (71 mm) 6.7 in. (169 mm)
J) Overall Length see below see below
K) Maximum Rollback at Ground Level 40 degrees 40 degrees
L) Maximum Rollback, Boom Fully Raised 55 degrees 55 degrees
M) Maximum Bucket Angle, Fully Raised 50 degrees 50 degrees

 
Dimensions (with Quick-Coupler and Bucket)
A) Dump Clearance see below
B) Dump Reach see below
C) Maximum Digging Depth 2.8 in. (71 mm)
D) Height to Hinge Pin, Fully Raised 13 ft. 7 in. (4136 mm)
E) Overall Length see below
F) Maximum Rollback, Boom Fully Raised 55 degrees
G) Maximum Bucket Discharge Angle, Fully Raised 45 degrees
H) Maximum Rollback at Ground Level 39 degrees

 

 

Dimensions (with Quick-Coupler and Construction Fork)
A) Reach, Fully Raised 2 ft. 5 in. (732 mm)
B) Fork Height, Fully Raised 12 ft. 7 in. (3845 mm)
C) Maximum Reach, Fork Level 5 ft. 4 in. (1627 mm)
D) Fork Height, Maximum Reach 5 ft. 9 in. (1764 mm)
E) Reach, Ground Level 3 ft. 4 in. (1021 mm)
F) Depth Below Ground 1.4 in (35 mm)
G) Tine Length 72 in. (1829 mm)
H) Overall Length 29 ft. 6 in. (8982 mm)

 

Standard Z-Bar Information with Pin On Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 4.75 cu. yd. (3.6 m3) 4.5 cu. yd. (3.4 m3)
Capacity, Struck SAE 4.2 cu. yd. (3.2 m3) 3.8 cu. yd. (2.9 m3)
Bucket Weight 4,006 lb (2021 kg) 3,709 lb (1682 kg)
Bucket Width 119 in. (3040 mm) 119.7 in. (3040 mm)
Breakout Force, SAE J732C 31,742 lb (14 398 kg) 34,340 lb (15 576 kg)
Tipping Load, Straight 33,079 lb (15 002 kg) 33,767 lb (15 314 kg)
Tipping Load, 40-Degree Full Turn, SAE 27,763 lb (12 591 kg) 28,389 lb (12 875 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 67.6in. (1718 mm) 65.7 in. (1668 mm)
Reach, 45-Degree Discharge, Full Height 45.4 in. (1152 mm) 42.2 in. (1072 mm)
Dump Clearance, 45-Degree  Full Height 113.5 in. (2883 mm) 115.8 in. (2942 mm)
Overall Length, Bucket on Ground 26 ft. 11 in. (8195 mm) 26 ft. 7 in. (8100 mm)
Loader Clearance Circle, Bucket in Carry Position 42 ft. 10 in. (13 067 mm) 42 ft. 8 in. (13 010 mm)
Operating Weight 40,704 lb (18 460 kg) 40,360 lb (18 304 kg)

 

Standard Z-Bar Information with Quick Coupler and Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge Light Material w/ Bolt on Edge
Capacity, Heaped SAE 4.5 cu. yd. (3.4 m3) 4.0 cu. yd. (3.06 m3)
Capacity, Struck SAE 3.8 cu. yd. (2.9 m3) 3.2 cu. yd. (2.5 m3)
Bucket Weight 4,456 lb (2021 kg) 3,890 lb (1764 kg)
Bucket Width 114.2 in. (2900 mm) 114.2 in. (2900 mm)
Breakout Force, SAE J732C 28,795 lb (13 059 kg) 32,019 lb (14 521 kg)
Tipping Load, Straight 33,126 lb (15 023 kg) 34,197 lb (15 509 kg)
Tipping Load, 40-Degree Full Turn, SAE 27,781 lb (12 599 kg) 28,758 lb (13 042 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 63.0 in. (1601 mm) 67.6 in. (1718 mm)
Reach, 45-Degree Discharge, Full Height 44.8 in. (1137 mm) 45.3 in. (1151 mm)
Dump Clearance, 45-Degree  Full Height 106.4 in. (2703 mm) 113.5 in. (2883 mm)
Overall Length, Bucket on Ground 27 ft. 4 in. (8334 mm) 26 ft. 11 in. (8194 mm)
Loader Clearance Circle, Bucket in Carry Position 42 ft. 9 in. (13 027 mm) 42 ft. 5 in. (12 940 mm)
Operating Weight 41,154 lb (18 664 kg) 40,587 lb (18 407 kg)

 

Standard Z-Bar with Quick Coupler and Construction Fork
Tine Length 72 in. (1829 mm)
Overall Length 29 ft. 6 in. (8982 mm)
Tipping Load, Straight (fork level, load centered 36 in. (914 mm) on tine) 24,446 lb (11 809 kg)
Tipping Load, 40 deg. Full Turn (fork level, load centered 36 in (914 mm) on tine) 20,543 lb (9318 kg)
Operating Weight 40,426 lb (18 334 kg)

 

High-Lift Z-Bar Pin-On Type Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 4.25 cu. yd. (3.3 m3)
Capacity, Struck SAE 3.7 cu. yd. (2.8 m3)
Bucket Weight 3,555 lb (1612 kg)
Bucket Width 114.2 in. (2900 mm)
Breakout Force, SAE J732C 30,610 lb (13 882 kg)
Tipping Load, Straight 27,432 lb (12 441 kg)
Tipping Load, 40-Degree Full Turn, SAE 22,974 lb (10 419 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 82.8 in. (2103 mm)
Reach, 45-Degree Discharge, Full Height 46.8 in. (1188 mm)
Dump Clearance, 45-Degree  Full Height 132.6 in. (3368 mm)
Overall Length, Bucket on Ground 28 ft. 2 in. (8579 mm)
Loader Clearance Circle, Bucket in Carry Position 43 ft. 9 in. (13 323 mm)
Operating Weight 40,671 lb (18 445 kg)
 
Click Here to download full brochure
 

 

Contact Us    Site Map