| Engine |
| Manufacture and Model |
John Deere PowerTech 6065H
certified to EPA Tier 2 emissions |
|
Rated Speed |
2,000 rpm |
Engine Power
Gears 1-3
Gears 4-5
Gears 6-8 |
145 net hp (108 kW)
165 net hp (123 kW)
185 net hp (138 kW) |
|
Aspiration |
turbocharged with air-to-air
aftercooler |
|
Number of Cylinders |
6 |
|
Displacement |
414 cu. in. (6.8 L) |
Net Torque @ 1,000 rpm
Gears 1-3
Gears 4-5
Gears 6-8 |
554 lb. ft. (751 Nm) @ 46% net torque rise
611 lb. ft. (828 Nm) @ 41% net torque rise
625 lb. ft. (847 Nm) @ 64% net torque rise |
|
Lubrication |
pressure system with full-flow
filter and cooler |
|
Air Cleaner with Restriction
Indicator |
dual element, dry, with tangential
unloader |
|
Electrical System |
24 volt with 100-amp alternator |
|
Batteries (two 12 volt) |
1,400 cold-cranking amps, 440-min.
reserve capacity |
| Operating
Weights |
|
SAE Operating Weights with
Standard Equipment |
Front
Rear
Total |
8,500 lb. (3855 kg)
23,510 lb (10 663 kg)
32,010 lb. (14 519 kg) |
|
Typical Operating Weights with
Front Push Block and Ripper |
Front
Rear
Total |
9,730 lb. (4413 kg)
28,060 lb. (12 728 kg)
37,790 lb. (17 141 kg) |
|
Maximum Operating Weight (total) |
46,800 lb. (21 228 kg) |
| Transmission |
|
Type |
direct-drive John Deere Powershift
Plus
modulated shift on-the-go, Event Based Shifiting (EBS) |
Travel Speeds
Shift Lever Position 1
Shift Lever Position 2
Shift Lever Position 3
Shift Lever Position 4
Shift Lever Position 5
Shift Lever Position 6
Shift Lever Position 7
Shift Lever Position 8 |
Forward and Reverse @
2,000 rpm with 14.00-24 tires
2.2 mph (3.4 km/h)
3.0 mph (4.9 km/h)
4.3 mph (6.8 km/h)
6.0 mph (9.6 km/h)
9.0 mph (14.4 km/h)
12.7 mph (20.3 km/h)
17.7 mph (28.4 km/h)
25.0 mph (40.0 km/h) |
| Blade Function |
|
|
All-hydraulic,
industry preferred hand-lever placement of blade
function controls;
includes float position; easy conversion from two-hand
to one-hand blade-lift control;
sever blade-lift arm positions |
Blade Range
Lift Above Ground
Blade Side Shift, Right or Left
Shoulder Reach Outside Wheels
Right
Left
Pitch at Ground Level |
18.5 in. (470 mm)
26.9 in. (680 mm)
82 in. (2.08 m)
82.5 in. (2.10 m)
42 degrees forward / 5 degrees back |
| Moldboard |
|
Type |
high-strength, pre-stressed, wear-resistant,
high carbon steel, equipped with replaceable side-shift
wear inserts |
|
Length |
12 ft. (3.66 m) |
|
Height |
24 in. (610 mm) |
|
Thickness |
0.88 in. (22 mm) |
| Capacities |
|
Fuel Tank |
106 gal. (401.2 L) |
|
Cooling System |
12 gal. (45.4 L) |
|
Engine Lubrication, Including
Filter |
6.25 gal. (23.7 L) |
|
Transmission |
6 gal. (22.7 L) |
|
Differential Housing |
9.5 gal. (36 L) |
|
Tandem Housing (each) |
20 gal. (75.7 L) |
|
Circle Gearbox |
1.5 gal. (5.7 L) |
|
Hydraulic Reservoir |
14 gal. (53 L) |
|
