Home About us History Locations President's Message Industrial Equipment John Deere Used Equipment Attachments Trail King Trailers Bomag NPK Hammers Mac-Lander Genesis Shears Double D Parts & Service Parts Service Rental Equipment Specs Model Comparisons Conversions Material Weights Download Center Lawn & Garden Residential Commercial Parts & Service Stihl Erb Toys Finance Powerplan Online Form Payment Calculator

Engine
Manufacture and Model	Liebherr D 924 T-EA1 water-cooled and turbocharged Tier II emissions compliant
Rated Power	130 SAE net hp (97 kW) @ 2,000 rpm per ISO 9249
Cylinders (wet sleeve)	4
Displacement	490 cu. in. (6.7 L)
Fuel Consumption, Typical	3.2 to 5.5 gal/hr (12 to 21 L/h)
Maximum Net Torque	450 lb ft (610 Nm) @ 1,200 rpm
Lubrication	pressure system with full-flow spin-on filter and integrated oil-to-water cooler
Air Cleaner	dual stage dry type with safety element and aspirated precleaner, with dash mounted restriction indicator
Electrical System	24 volt with 55-amp alternator
Cooling Fan	blower type, viscous drive
Cold-Starting Aid	intake air heater

 

Transmission
Forward and Reverse Speed Ranges       Low Speed Range       High Speed Range	0 to 4 mph (0 to 6.5 km/h) 0 to 6.8 mph (0 to 11 km/h)

 

Hydraulic System
Loader Cycle Times      Lifting      Lowering      Bucket Dump	6.5 sec 2.1 sec 1.5 sec

 

Capacities
Fuel Tank with Lockable Cap	69 gal. (260 L)
Cooling System with Recovery Tank	18 gal. (68 L)
Engine Oil Including Spin-On Filter	5.3 gal. (20 L)
Hydraulic/Hydrostatic Reservoir with Filter	34 gal. (130 L)
Splitter Drive	2.6 qt. (2.5 L)
Final Drive (each)	8.9 qt. (8.5 L)

 

Undercarriage
Tracks	John Deere Dura-Trax features large deep-heat-treated components; pins and bushings are sealed for life; rollers and idlers are permanently sealed and lubricated; full-length track frame covers reduce material buildup and ease cleaning
Chain	sealed and lubricated
Track Shoes (each side)	42
Ground Contact Area     20 in (508 mm) Grouser Width (closed center, double bar)      22 in (560 mm) Grouser Width (closed center, double bar)	3,902 sq. in. (25 180 cm2) 4,302 sq. in. (27 750 cm2)
Ground Clearance, Minimum with Double Bar Grouser (excluding grouser height)	16 in. (395 mm)
Length of Track on Ground	98 in. (2478 mm)
Track Gauge (standard)	66 in. (1680 mm)
Track Rollers (each side)	6
Carrier Rollers	1
Track Pitch	6.9 in. (175 mm)

 

Ground Pressure
With Standard Equipment, Canopy, Bucket, Full Fuel Tank, and 175 lb (79 kg) Operator
20 in (508 mm) Double Grouser Shoes	8.7 psi (60 kPa)
22 in (560 mm) Double Grouser Shoes	7.9 psi (54 kPa)

 

SAE Operating Weight
With Standard Equipment, Canopy, Bucket, Full Fuel Tank, and 175 lb (79 kg) Operator, and 20 in (508 mm) Double Grouser Shoes	33,950 lb (15 400 kg)

Overall Dimensions
A) Height over Cab (including grousers)	123 in. (3129 mm)
B) Height over Exhaust Pipe	122 in. (3092 mm)
C) Length to Front of Track	171 in. (4339 mm)
D) Overall Length (with bucket)	241 in. (6132 mm)
E) Track Guage	66 in. (1680 mm)
F) Ground Clearance	15.6 in. (395 mm)
Standard Bucket with Bolt-on Teeth
Capacity Heaped	2.35 cu. yd. (1.8 m3)
Breakout Force	27,675 lb (12 550 kg)
Static Tipping Load	23,086 lb. (10 470 kg)
G) Dumping Height at 45 degrees	111 in. (2827 mm)
H) Reach at 45 degrees	42 in. (1072 mm)
I) Maximum Digging Depth Below Grade	5.2 in. (132 mm)
J) Maximum Operating Height	197 in. (5000 mm)
K) Maximum Height of Hinge Pin	144 in. (3662 mm)
L) Height of Hinge Pin, Transport Position	20 in. (503 mm)
M) Width of Bucket	96 in. (2445 mm)