John Deere 650J Dozer Specs
 
Engine 650J LT 650J XLT 650J LGP
Manufacture and Model John Deere 4045H
Non-Road Emission Standards certified to EPA Tier 2 emissions
Net Peak Power (ISO9249) 90 hp (67 kW)
@ 2,200 rpm		 90 hp (67 kW)
@ 2,200 rpm		 99 hp (74 kW)
@ 2,200 rpm
Net Peak Torque (ISO9249) 306 lb. ft. (416 Nm)
@ 1,200 rpm		 306 lb. ft. (416 Nm)
@ 1,200 rpm		 306 lb. ft. (416 Nm)
@ 1,200 rpm
Cylinders 4
Displacement 276 cu. in. (4.5 L)
Aspiration altitude-compensating turbocharger and air-to-air intercooler
Lubrication pressure system with full-flow spin-on filter and oil-to-water cooler

 

Transmission      
Travel Speeds 5.0 mph (8.0 km/h)

 

Capacities      
Fuel Tank 47 gal. (178 L)
Cooling System with Recovery Tank 17 qt. (16 L)
Engine Oil with Filter 15 qt. (14 L)
Transmission Reservoir with Filter 11.3 gal (43 L)
Final Drive (each) 7 qt. (6.6 L)
Hydraulic Reservoir and Filter 8.5 gal. (32.2 L)

 

Undercarriage 650J LT 650J XLT 650J LGP
Tracks John Deere Dura-Trax, deep-heat-treated, pins and bushings sealed for life, rollers and idlers permanently sealed and lubricated
Track Guage 5 ft. 1 in. (1549 mm) 5 ft. 1 in. (1549 mm) 5 ft. 9 in. (1753 mm)
Grouser Width (closed center, single bar) 18 in. (457 mm) 18 in. (457 mm) 28 in. (711 mm)
Chain sealed and lubricated
Shoes (each side) 38 40 40
Track Rollers (single flange, each side) 6 7 7
Track Length on Ground 7 ft. 3 in. (2210 mm) 7 ft. 8 in. (2337 mm) 7 ft. 8 in. (2337 mm)
Ground Contact Area 3,132 sq. in.
(20 206 cm2)		 3,312 sq. in.
(21 368 cm2)		 5,152 sq. in.
(33 239 cm2)
Ground Pressure 5.9 psi (40.6 kPa) 5.6 psi (38.6 kPa) 3.8 psi (26.2 kPa)
Ground Clearance with Single-Bar Grouser (excluding grouser height) 14.3 in (363 mm)
Track Pitch 6.73 in. (171 mm)

 

Operating Weights 650J LT 650J XLT 650J LGP
With Standard Equipment, Rops, Full Fuel Tank, and 175 lb (79 kg) Operator      
105 in. (2667 mm) Blade and
18 in. (457 mm) Track Shoes		 18,560 lb (8419 kg) 18,600 lb (8455 kg)  
128 in. (3251 mm) Blade and
28 in. (711 mm) Track Shoes		     19,750 lb (8977 kg)

 
Machine Dimensions 650J LT 650J XLT 650J LGP
A) Overall Height (Rops or Cab)
     Height of Grousers		 9 ft. 1 in (2769 mm)
1.9 in. (48 mm)		 9 ft. 1 in (2769 mm)
1.9 in. (48 mm)		 9 ft. 1 in (2769 mm)
1.9 in. (48 mm)
B) Overall Length 13 ft. 5 in. (4089 mm) 13 ft. 11 in. (4242 mm) 13 ft. 11 in. (4242 mm)
C) Overall Length with Extended Drawbar 13 ft. 10 in. (4216 mm) 14 ft. 1 in. (4293 mm) 14 ft. 1 in. (4293 mm)
D) Overall Length with Winch 14 ft. 11 in. (4547 mm) 15 ft. 6 in. (4724 mm) 14 ft. 11 in. (4547 mm)
E) Minimum Ground Clearance 14 in. (363 mm) 14.3 in. (363 mm) 14.3 in. (363 mm)
F) Blade Lift Height 32 in. (818 mm) 32.2 in. (818 mm) 32.2 in. (818 mm)
G) Blade Digging Depth 20 in. (500 mm) 19.7 in. (500 mm) 19.7 in. (500 mm)
H) Blade Cutting Edge Angle, Adjustable 52 to 60 deg. 52 to 60 deg. 52 to 60 deg.
Blade Specs 650J LT 650J XLT 650J LGP
I) Width 105 in. (2667 mm) 105 in.(2667 mm) 115 in. (2921 mm)
J) Height
    SAE Capacity		 3 ft. 6 in. (1067 mm)
2.91 cu. yd. (2.22 m3)		 3 ft. 6 in. (1067 mm)
2.91 cu. yd. (2.22 m3)		 3 ft. 2 in. (1067 mm)
2.57 cu. yd. (1.96 m3)
K) Blade Angle 22.2 degrees 22.2 degrees 22.2 degrees
L) Angle Width 8 ft. 1 in. (2469 mm) 8 ft. 1 in. (2469 mm) 8 ft. 11 in. (2705 mm)
M) Tilt 14.3 in. (363 mm) 14.3 in. (363 mm) 15.7 in. (399 mm)
N) Cut Reach 4.6 in. (117 mm) 4.6 in. (117 mm) 0.2 in. (2464 mm)
O) Width Over Track 6 ft. 7 in. (2007 mm) 6 ft. 7 in. (2007 mm) 8 ft. 1 in. (2464 mm)
P) Cast Reach 13.6 in. (345 mm) 13.6 in. (345 mm) 9.3 in. (236 mm)
       
I) Width 115 in. (2921 mm) 115 in. (2921 mm) 124 in. (3150 mm)
J) Height
    SAE Capacity		 3 ft. 2 in. (1067 mm)
2.57 cu. yd. (1.96 m3)		 3 ft. 2 in. (1067 mm)
2.57 cu. yd. (1.96 m3)		 2 ft. 11 in. (894 mm)
2.46 cu. yd. (1.88 m3)
K) Blade Angle 22.2 degrees 22.2 degrees 22.2 degrees
L) Angle Width 8 ft. 11 in. (2705 mm) 8 ft. 11 in. (2705 mm) 9 ft. 7 in. (2916 mm)
M) Tilt 15.7 in. (399 mm) 15.7 in. (399 mm) 16.9 in. (429 mm)
N) Cut Reach 9.2 in. (233.68 mm) 9.2 in. (233.68 mm) 4.4 in. (112 mm)
O) Width Over Track 6 ft. 7 in. (2007 mm) 6 ft. 7 in. (2007 mm) 8 ft. 1 in. (2464 mm)
P) Cast Reach 18.3 in. (465 mm) 18.3 in. (465 mm) 13.4 in. (340 mm)
       
I) Width 124 in. (3150 mm) 124 in. (3150 mm) 128 in. (3251 mm)
J) Height
    SAE Capacity		 2 ft. 11 in. (894 mm)
2.46 cu. yd. (1.88 m3)		 2 ft. 11 in. (894 mm)
2.46 cu. yd. (1.88 m3)		 3 ft. 2 in. (955 mm)
2.91 cu. yd. (2.22m3)
K) Blade Angle 22.2 degrees 22.2 degrees 22.2 degrees
L) Angle Width 9 ft. 7 in. (2916 mm) 9 ft. 7 in. (2916 mm) 9 ft. 11 in. (3010 mm)
M) Tilt 16.9 in. (429 mm) 16.9 in. (429 mm) 17.5 in. (445 mm)
N) Cut Reach 13.4 in. (340.36 mm) 13.4 in. (340.36 mm) 6.2 in. (157 mm)
O) Width Over Track 6 ft. 7 in. (2007 mm) 6 ft. 7 in. (2007 mm) 8 ft. 1 in. (2464 mm)
P) Cast Reach 22.4 in. (569 mm) 22.4 in. (569 mm) 15.3 in. (389 mm)
 
Click Here to download full brochure
 

 

Contact Us    Site Map