John Deere 624K Wheel Loader Specs
 
Engine
Type John Deere PowerTech 6068H
complies with EPA Tier 2 regulations
Cylinders 6
Valves per Cylinder 4
Displacement 414 cu. in. (6.8 L)
Net Peak Power (ISO9249) 198 hp (147 kW) @ 1,800 rpm
Net Peak Torque (ISO9249) 617 lb. ft. (810 Nm) @ 1,600 rpm
Aspiration turbocharged and charge air cooled
Air Cleaner dual element dry type; restriction indicator in cab
Fan Drive hydraulically driven, proportionally controlled, fan aft of coolers
Electrical System 24 volt with 80-amp alternator
Batteries (two 12 volt) 950 CCA

 

Transmission
Travel Speeds
        Gear 1
        Gear 2
        Gear 3
        Gear 4		 Forward
4.7 mph (7.6 km/h)
7.8 mph (12.5 km/h)
15.5 mph (25.0 km/h)
24.5 mph (39.5 km/h)		 Reverse
4.7 mph (7.6 km/h)
8.1 mph (13.1 km/h)
16.0 mph (25.7 km/h)
 

 

Refill Capacities
Fuel Tank (with ground level fueling) 93 gal. (352 L)
Cooling System 29 qt. (27 L)
Engine Oil, Including Filter 20 qt. (19 L)
Transmission, Including Filter 22 qt. (21 L)
Differential ( each axle)
     Front
     Rear
23 qt. (22 L)
18 qt. (17 L)
Hydraulic Reservoir and Filters 29 gal. (110 L)
Wet-Disc Parking Brake 10 oz. (0.3 L)

 
Dimensions (with Pin On Bucket) Standard Z-Bar High-Lift Z Bar
A) Height to Top of Cab 10 ft. 11 in. (3.32 m) 10 ft. 11 in. (3.32 m)
B) Height to Top of Exhaust 10 ft. 10 in. (3303 mm) 10 ft. 10 in. (3303 mm)
C) Ground Clearance 15.1 in. (384 mm) 15.1 in. (384 mm)
D) Length from Centerline to Front Axle 5 ft. 0 in. (1.52 m) 5 ft. 0 in. (1.52 m)
E) Wheelbase 10 ft. 1 in. (3.09 m) 10 ft. 1 in. (3.09 m)
F) Dump Clearance see below see below
G) Height to Hinge Pin, Fully Raised 13 ft. 0 in. (3.95 m) 14 ft. 2 in. (4.30 m)
H) Dump Reach see below see below
I) Maximum Digging Depth 3.8 in. (95 mm) 7.7 in. (196 mm)
J) Overall Length see below see below
K) Maximum Rollback at Ground Level 37 degrees 36 degrees
L) Maximum Rollback, Boom Fully Raised 50 degrees 49 degrees
M) Maximum Bucket Angle, Fully Raised 45 degrees 46 degrees

 

Dimensions (with Quick-Coupler and Bucket)
  Standard Z Bar High Lift Z Bar
A) Dump Clearance see below see below
B) Dump Reach see below see below
C) Maximum Digging Depth 6.5 in. (164 mm) 10.3 in. (262 mm)
D) Height to Hinge Pin, Fully Raised 13 ft. 0 in. (3.96 m) 14 ft. 2 in. (4.32 m)
E) Overall Length see below see below
F) Maximum Rollback, Boom Fully Raised 55 degrees 48 degrees
G) Maximum Bucket Discharge Angle, Fully Raised 45 degrees 42 degrees
H) Maximum Rollback at Ground Level 39 degrees 39 degrees

 

 

Dimensions (with Quick-Coupler and Construction Fork)
  Standard Z Bar High Lift Z Bar
A) Reach, Fully Raised 29 in. (0.75 m) 33 in. (0.84 m)
B) Fork Height, Fully Raised 12 ft. 3 in. (3.73 m) 13 ft. 5 in. (4.09 m)
C) Maximum Reach, Fork Level 5 ft. 2 in. (1.58 m) 6 ft. 4 in. (1.92 m)
D) Fork Height, Maximum Reach 5 ft. 10 in. (1.77 m) 5 ft. 10 in. (1.77 m)
E) Reach, Ground Level 3 ft. 2 in. (0.96 m) 4 ft. 7 in. (1.40 m)
F) Depth Below Ground 0.9 in. (23 mm) 4.8 in. (123 mm)
G) Tine Length see below see below
H) Overall Length see below see below

 

Standard Z-Bar Information with Pin On Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 3.5 cu. yd. (2.7 m3)
Capacity, Struck SAE 3.0 cu. yd. (2.0 m3)
Bucket Weight 2,532 lb (1148 kg)
Bucket Width 8 ft. 10 in. (2.69 m)
Breakout Force, SAE J732C 28,484 lb (12 920 kg)
Tipping Load, Straight 30,693 lb (13 922 kg)
Tipping Load, 40-Degree Full Turn, SAE 26,524 lb (12 031 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 5 ft. 2 in. (1.57 m)
Reach, 45-Degree Discharge, Full Height 3 ft. 4 in. (1.02 m)
Dump Clearance, 45-Degree  Full Height 9 ft. 5 in. (2.86 m)
Overall Length, Bucket on Ground 25 ft. 5 in. (7.76 m)
Loader Clearance Circle, Bucket in Carry Position 40 ft. 2 in. (12.24 m)
Operating Weight 33,477 lb (15 185 kg)

 

Standard Z-Bar Information with Quick Coupler and Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 3.5 cu. yd. (2.7 m3)
Capacity, Struck SAE 3.0 cu. yd. (2.3 m3)
Bucket Weight 3,378 lb (1532 kg)
Bucket Width 8 ft. 10 in. (2.69 m)
Breakout Force, SAE J732C 23,451 lb (10 637 kg)
Tipping Load, Straight 27,571 lb (12 506 kg)
Tipping Load, 40-Degree Full Turn, SAE 23,715 lb (10 757 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 5 ft. 2 in. (1.56 m)
Reach, 45-Degree Discharge, Full Height 3 ft. 8 in. (1.11 m)
Dump Clearance, 45-Degree  Full Height 8 ft. 10 in. (2.69 m)
Overall Length, Bucket on Ground 26 ft. 2 in. (7.98 m)
Loader Clearance Circle, Bucket in Carry Position 40 ft. 7 in. (12.38 m)
Operating Weight 34,291 lb (15 554 kg)

 

Standard Z-Bar with Quick Coupler and Construction Fork
Tine Length 48 in. (1220 mm) 60 in. (1525 mm)
Overall Length 26 ft. 10 in. (8.18 m) 27 ft. 10 in. (8.48 m)
Tipping Load, Straight (fork level, load centered 36 in. (914 mm) on tine) 21,473 lb (9740 kg) 20,311 lb (9213 kg)
Tipping Load, 40 deg. Full Turn (fork level, load centered 36 in (914 mm) on tine) 18,556 lb (8417 kg) 17,538 lb (7955 kg)
Operating Weight 33,572 lb (15 228 kg) 33,667 lb (15 271 kg)

 

High-Lift Z-Bar Pin-On Type Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 3.5 cu. yd. (2.7 m3)
Capacity, Struck SAE 3.0 cu. yd. (2.3 m3)
Bucket Weight 2,532 lb (1149 kg)
Bucket Width 8 ft. 10 in. (2.69 m)
Breakout Force, SAE J732C 25,884 lb (11 741 kg)
Tipping Load, Straight 25,483 lb (11 559 kg)
Tipping Load, 40-Degree Full Turn, SAE 21,949 lb (9956 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 6 ft. 4 in. (1.93 m)
Reach, 45-Degree Discharge, Full Height 3 ft. 8 in. (1.11 m)
Dump Clearance, 45-Degree  Full Height 10 ft. 7 in. (3.23 m)
Overall Length, Bucket on Ground 26 ft. 9 in. (8.17 m)
Loader Clearance Circle, Bucket in Carry Position 41 ft. 4 in. (12.61 m)
Operating Weight 33,773 lb (15 319 kg)

 

High-Lift Z-Bar Quick Coupler Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 3.5 cu. yd. (2.7 m3) 3.0 cu. yd. (2.3 m3)
Capacity, Struck SAE 3.0 cu. yd. (2.3 m3) 2.7 cu. yd. (2.1 m3)
Bucket Weight 3,444 lb (1562 kg) 3,289 lb (1492 kg)
Bucket Width 8 ft. 10 in. (2.69 m) 8 ft. 10 in. (2.69 m)
Breakout Force, SAE J732C 23,719 lb (10 759 kg) 25,870 lb (11 734 kg)
Tipping Load, Straight 23,814 lb (10 802 kg) 24,283 lb (11 015 kg)
Tipping Load, 40-Degree Full Turn, SAE 20,408 lb (9257 kg) 20,837 lb (9452 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 5 ft. 9 in. (1.75 m) 5 ft. 7 in. (1.71 m)
Reach, 45-Degree Discharge, Full Height 4 ft. 2 in. (1.28 m) 3 ft. 11 in. (1.20 m)
Dump Clearance, 45-Degree  Full Height 8 ft. 10 in. (2.70 m) 9 ft. 2 in. (2.78 m)
Overall Length, Bucket on Ground 26 ft. 8 in. (8.13 m) 26 ft. 3 in. (8.01 m)
Loader Clearance Circle, Bucket in Carry Position 41 ft. 4 in. (12.60 m) 40 ft. 4 in. (12.30 m)
Operating Weight 36,275 lb (16 454 kg) 36,121 lb (16 384 kg)

 

High Lift Z-Bar with Quick Coupler and Construction Fork
Tine Length 48 in. (1220 mm) 60 in. (1525 mm)
Overall Length 28 ft. 2 in. (8.60 m) 29 ft. 2 in. (8.89 m)
Tipping Load, Straight (fork level, load centered and positioned at 50% tine length) 22,782 lb (10 334 kg) 17,952 lb (8143 kg)
Tipping Load, 40 deg. Full Turn (fork level, load centered and positioned at 50% tine length) 20,161 lb (9145 kg) 15,445 lb (7006 kg)
Operating Weight 33,887 lb (15 371 kg) 33,982 lb (15 414 kg)
 
Click Here to download full brochure
 

 

Contact Us    Site Map