John Deere 624J Wheel Loader Specs
 
Engine
Type John Deere PowerTech 6068H
complies with EPA Tier 2 regulations
Cylinders 6
Valves per Cylinder 4
Displacement 414 cu. in. (6.8 L)
Net Peak Power (ISO9249) 180 hp (129 kW) @ 1,800 rpm
Net Peak Torque (ISO9249) 605 lb. ft. (810 Nm) @ 1,000 rpm
Aspiration turbocharged and charge air cooled
Air Cleaner dual element dry type; restriction indicator in cab
Fan Drive hydraulically driven, proportionally controlled, fan aft of coolers
Electrical System 24 volt with 80-amp alternator
Batteries (two 12 volt) 950 CCA

 

Transmission
Travel Speeds
        Gear 1
        Gear 2
        Gear 3
        Gear 4		 Forward
4.5 mph (7.2 km/h)
7.7 mph (12.4 km/h)
15.2 mph (24.5 km/h)
24.6 mph (39.5 km/h)		 Reverse
4.7 mph (7.5 km/h)
8.1 mph (13.1 km/h)
16.0 mph (25.8 km/h)
 

 

Refill Capacities
Fuel Tank (with ground level fueling) 92 gal. (348 L)
Cooling System 23 qt. (22 L)
Engine Oil, Including Filter 25 qt. (24 L)
Transmission, Including Filter 24 qt. (23 L)
Differential ( each axle)
     Front
     Rear
26 qt. (24.5 L)
21 qt. (20 L)
Hydraulic Reservoir and Filters 31.5 gal. (119 L)
Wet-Disc Parking Brake 10 oz. (0.3 L)

 

Hydraulic System / Steering 3.0 cu. yd. (2.3 m3) bucket with bolt on cutting edge
Maximum Lift Capacity Standard Z Bar High Lift Z Bar
     Lift at Ground Level
     Lift at Maximum Height		 30,958 lb (14 040 kg)
17,305 lb (7848 kg)		 29,190 lb (11 835 kg)
15,812 lb (7171 kg)

 
Dimensions (with Pin On Bucket) Standard Z-Bar High-Lift Z Bar
A) Height to Top of Cab 10 ft. 10.6 in. (3317 mm) 10 ft. 10.6 in. (3317 mm)
B) Height to Top of Exhaust 10 ft. 10 in. (3303 mm) 10 ft. 10 in. (3303 mm)
C) Ground Clearance 17.1 in. (435.6 mm) 17.1 in. (435.6 mm)
D) Length from Centerline to Front Axle 59.65 in. (1515 mm) 59.65 in. (1515 mm)
E) Wheelbase 119.3 in. (3030 mm) 119.3 in. (3030 mm)
F) Dump Clearance see below see below
G) Height to Hinge Pin, Fully Raised 13 ft. 0 in. (3966 mm) 14 ft. 3 in. (4332 mm)
H) Dump Reach see below see below
I) Maximum Digging Depth 3.5 in. (88 mm) 7.4 in. (188 mm)
J) Overall Length see below see below
K) Maximum Rollback at Ground Level 40 degrees 40 degrees
L) Maximum Rollback, Boom Fully Raised 55 degrees 55 degrees
M) Maximum Bucket Angle, Fully Raised 50 degrees 50 degrees

 
Dimensions (with Quick-Coupler and Bucket)
  Standard Z Bar High Lift Z Bar
A) Dump Clearance see below see below
B) Dump Reach see below see below
C) Maximum Digging Depth 6.5 in. (164 mm) 10.5 in. (266 mm)
D) Height to Hinge Pin, Fully Raised 13 ft. 0 in. (3966 mm) 14 ft. 3 in. (4332 mm)
E) Overall Length see below see below
F) Maximum Rollback, Boom Fully Raised 55 degrees 49 degrees
G) Maximum Bucket Discharge Angle, Fully Raised 55 degrees 46 degrees
H) Maximum Rollback at Ground Level 42 degrees 42 degrees

 

 

Dimensions (with Quick-Coupler and Construction Fork)
  Standard Z Bar High Lift Z Bar
A) Reach, Fully Raised 2 ft. 5 in. (742 mm) 2 ft. 9 in. (828 mm)
B) Fork Height, Fully Raised 12 ft. 2 in. (3704 mm) 13 ft. 4 in. (4070 mm)
C) Maximum Reach, Fork Level 5 ft. 2 in. (1579 mm) 6 ft. 3 in. (1910 mm)
D) Fork Height, Maximum Reach 5 ft. 9 in. (1748 mm) 5 ft. 9 in. (1747 mm)
E) Reach, Ground Level 3 ft. 1 in. (938 mm) 4 ft. 6 in. (1357 mm)
F) Depth Below Ground 1.8 in. (45 mm) 5.8 in. (146 mm)
G) Tine Length see below see below
H) Overall Length see below see below

 

Standard Z-Bar Information with Pin On Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 3.5 cu. yd. (2.7 m3) 3.0 cu. yd. (2.3 m3)
Capacity, Struck SAE 3.0 cu. yd. (2.0 m3) 2.5 cu. yd. (1.6 m3)
Bucket Weight 2,630 lb (1193 kg) 2,460 lb (1116 kg)
Bucket Width 105.9 in. (2690 mm) 105.9 in. (2690 mm)
Breakout Force, SAE J732C 28,483 lb (12 920 kg) 31,526 lb (14 300 kg)
Tipping Load, Straight 25,639 lb (11 630 kg) 26,036 lb (11 810 kg)
Tipping Load, 40-Degree Full Turn, SAE 21,854 lb (9913 kg) 22,213 lb (10 076 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 62.4 in. (1585 mm) 60.8 in. (1543 mm)
Reach, 45-Degree Discharge, Full Height 40.6 in. (1031 mm) 37.5 in. (952 mm)
Dump Clearance, 45-Degree  Full Height 113 in. (2885 mm) 116.7 in. (2964 mm)
Overall Length, Bucket on Ground 24 ft. 10 in. (7572 mm) 24 ft. 6 in. (7452 mm)
Loader Clearance Circle, Bucket in Carry Position 39 ft. 8 in. (12 076 mm) 39 ft. 5 in. (12 008 kg)
Operating Weight 31,691 lb (14 375 kg) 31,522 lb (14 298 kg)

 

Standard Z-Bar Information with Quick Coupler and Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 3.5 cu. yd. (2.7 m3) 3.0 cu. yd. (2.3 m3)
Capacity, Struck SAE 3.0 cu. yd. (2.3 m3) 2.7 cu. yd. (2.1 m3)
Bucket Weight 3,522 lb (1598 kg) 3,348 lb (1519 kg)
Bucket Width 105.9 in. (2690 mm) 105.9 in. (2690 mm)
Breakout Force, SAE J732C 23,455 lb (10 637 kg) 25,633 lb (11 625 kg)
Tipping Load, Straight 23,882 lb (10 831 kg) 24,286 lb (11 014 kg)
Tipping Load, 40-Degree Full Turn, SAE 20,237 lb (9178 kg) 20,606 lb (9345 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 63.0 in. (1600 mm) 61.7 in. (1568 mm)
Reach, 45-Degree Discharge, Full Height 45.7 in. (1161 mm) 42.6 in. (1081 mm)
Dump Clearance, 45-Degree  Full Height 105.4 in. (2678 mm) 108.6 in. (2759 mm)
Overall Length, Bucket on Ground 25 ft. 10 in. (7864 mm) 25 ft. 5 in. (7744 mm)
Loader Clearance Circle, Bucket in Carry Position 40 ft. 3 in. (12 258 mm) 40 ft. 0 in. (12 183 mm)
Operating Weight 32,608 lb (14 788 kg) 32,416 lb (14 701 kg)

 

Standard Z-Bar with Quick Coupler and Construction Fork
Tine Length 48 in. (1220 mm) 60 in. (1525 mm)
Overall Length 26 ft. 2 in. (7967 mm) 27 ft. 2 in. (8270 mm)
Tipping Load, Straight (fork level, load centered 36 in. (914 mm) on tine) 17,324 lb (7858 kg) 16,357 lb (7419 kg)
Tipping Load, 40 deg. Full Turn (fork level, load centered 36 in (914 mm) on tine) 14,784 lb (6706 kg) 13,942 lb (6324 kg)
Operating Weight 31,227 lb (14 162 kg) 31,331 lb (14 209 kg)

 

High-Lift Z-Bar Pin-On Type Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 3.5 cu. yd. (2.7 m3) 3.0 cu. yd. (2.3 m3)
Capacity, Struck SAE 3.0 cu. yd. (2.3 m3) 2.7 cu. yd. (2.1 m3)
Bucket Weight 2,630 lb (1193 kg) 2,460 lb (1116 kg)
Bucket Width 105.9 in. (2690 mm) 105.9 in. (2690 mm)
Breakout Force, SAE J732C 25,884 lb (11 741 kg) 28,657 lb (12 999 kg)
Tipping Load, Straight 21,193 lb (9613 kg) 21,543 lb (9772 kg)
Tipping Load, 40-Degree Full Turn, SAE 17,998 lb (8164 kg) 18,320 lb (8310 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 76.4 in. (1941 mm) 74.9 in. (1903 mm)
Reach, 45-Degree Discharge, Full Height 44.0 in. (1117 mm) 40.9 in. (1039 mm)
Dump Clearance, 45-Degree  Full Height 128 in. (3251 mm) 131.1 in. (3330 mm)
Overall Length, Bucket on Ground 26 ft. 2 in. (7984 mm) 25 ft. 10 in. (7866 mm)
Loader Clearance Circle, Bucket in Carry Position 40 ft. 10 in. (12 452 mm) 40 ft. 7 in. (12 375 mm)
Operating Weight 31,885 lb (14 463 kg) 31,715 lb (14 386 kg)

 

High-Lift Z-Bar Quick Coupler Bucket
Bucket Type/Size General Purpose w/ Bolt on Edge
Capacity, Heaped SAE 3.5 cu. yd. (2.7 m3) 3.0 cu. yd. (2.3 m3)
Capacity, Struck SAE 3.0 cu. yd. (2.3 m3) 2.7 cu. yd. (2.1 m3)
Bucket Weight 3,523 lb (1598 kg) 3,348 lb (1519 kg)
Bucket Width 105.9 in. (2690 mm) 105.9 in. (2690 mm)
Breakout Force, SAE J732C 21,358 lb (9686 kg) 23,342 lb (10 588 kg)
Tipping Load, Straight 19,682 lb (8926 kg) 20,041 lb (9089 kg)
Tipping Load, 40-Degree Full Turn, SAE 16,595 lb (7526 kg) 16,924 lb (7677 kg)
Reach, 45-Degree Dump, 7 ft (2.13 m) Clearance 77.9 in. (1980 mm) 75.9 in. (1928 mm)
Reach, 45-Degree Discharge, Full Height 49.0 in. (1247 mm) 45.6 in. (1158 mm)
Dump Clearance, 45-Degree  Full Height 119 in. (3043 mm) 122 in. (3118 mm)
Overall Length, Bucket on Ground 27 ft. 1 in. (8267 mm) 26 ft. 9 in. (8148 mm)
Loader Clearance Circle, Bucket in Carry Position 41 ft. 6 in. (12 652 mm) 41 ft. 3 in. (12 570 mm)
Operating Weight 32,802 lb (14 876 kg) 32,604 lb (14 789 kg)

 

High Lift Z-Bar with Quick Coupler and Construction Fork
Tine Length 48 in. (1220 mm) 60 in. (1525 mm)
Overall Length 27 ft. 6 in. (8385 mm) 28 ft. 6 in. (8688 mm)
Tipping Load, Straight (fork level, load centered 36 in. (914 mm) on tine) 15,253 lb (6919 kg) 14,462 lb (6560 kg)
Tipping Load, 40 deg. Full Turn (fork level, load centered 36 in (914 mm) on tine) 12,978 lb (5887 kg) 12,288 lb (5574 kg)
Operating Weight 31,423 lb (14 251 kg) 31,525 lb (14 297 kg)
 
Click Here to download full brochure
 

 

Contact Us    Site Map