John Deere 350D LC Excavator Specs
 
Engine
Type John Deere 6090H
Non Road Emission Standard certified to EPA Tier 3 emissions
Net Power (ISO 9249) 271 hp (202 kW) @ 1,900 rpm
Net Torque (ISO 9249) 1,898 lb ft (1399 Nm) @ 1,300 rpm
Displacement 542 cu. in. (9.0 L)
Aspiration altitude compensating turbocharger

 

Electrical    
Batteries 2 x 12 volt
Reserve Capacity 180 min.
Alternator Rating 50 amp

 

Undercarriage    
Drawbar Pull 64,735 lb (29 200 kg)

 

Ground Pressure    
32 in. (800 mm) Triple Semi-Grouser Shoes 7.16 psi (49.4 kPa)

 

Serviceability    
Fuel Tank 166 gal. (630 L)
Cooling System 42 qt. (39.7 L)
Engine Oil with Filter 28.5 qt. (27 L)
Hydraulic Tank 51.5 gal. (195 L)
Hydraulic System 89.8 gal. (340 L)
Propel Gearbox (each) 9 qt. (8.5 L)
Swing Drive 12.5 qt. (11.8 L)

 

Operating Weights    
Full Fuel Tank, 175 lb Operator; 2.3 cu yd, 54 in. 2,557 lb Bucket; 13 ft. 1 in. Arm; 16,314 lb Counterweight;  
32 in. (800 mm) Triple Semi-Grouser Shoes 77,970 lb (35 367 kg)
 
Operating Dimensions  
Arm Length 13 ft. 1 in.
Arm Force 32,682 lb (145.4 kN)
Bucket Digging Force 48,220 lb (241.5 kN)
Lifting Capacity Over Front at Ground Level
20 ft. (6.1 m) Reach		 27,623 lb (12 530 kg)
A) Maximum Reach 38 ft. 11 in. (11.86 m)
A')Maximum Reach at Ground Level 38 ft. 3 in. (11.67 m)
B) Maximum Digging Depth 26 ft. 10 in. (8.18 m)
B')Maximum Digging Depth at 8 ft.  Flat Bottom 26 ft. 5 in. (8.18 m)
C) Maximum Cutting Height 35 ft. 3 in. (10.75 m)
D) Maximum Dumping Height 25 ft. 0 in. (7.63 m)
E) Minimum Swing Radius 14 ft. 8 in. (4.47 m)
F) Maximum Vertical Wall 23 ft. 10 in. (7.27 m)
G) Tail Swing Radius 11 ft. 1 in. (3.38 m)

 

 

Machine Dimensions 13 ft. 1 in. (4.0 m) Arm
A) Overall Height 11 ft. 10 in. (3.60 m)
B) Overall Length 36 ft. 5 in. (11.09 m)

 

Lift Capacities

Boldface italic type indicates hydraulic-limited capacities; lightface type indicates stability-limited capacities, in lb. (kg).  Ratings at bucket lift hook; machine equipped with 2.3 cu. yd., 54 in. 2,557 lb bucket; 16,314 lb (7400 kg) counterweight; standard gauge; and situated on firm, uniform supporting surface.  Total load includes weight of cables, hook, etc.  Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine.  All lift capacities are based on SAE J1097.
Load Point Height 15 ft. (4.57 m) 20 ft. (6.10 m) 25 ft. (7.62 m) 30 ft. (9.15 m) 35 ft. (10.67 m)
Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side

With 13 ft. 1 in. (4.0 m) Arm and 32 in. (800 mm) triple semi-grouser shoes
20 ft. (6.10 m)             12,273
(5567)		 9,996
(4534)		    
15 ft. (4.57 m)         14,199
(6441)		 13,721
(6224)		 13,451
(6101)		 9,724
(4411)		    
10 ft. (3.05 m) 26,701
(12 111)		 26,701
(12 111)		 19,872
(9014)		 18,786
(8521)		 16,581
(7521)		 12,937
(5868)		 14,716
(6675)		 9,301
(4219)		 10,208
(4630)		 6,785
(3078)
5 ft. (1.52 m) 34,222
(12 523)		 26,533
(12 035)		 24,420
(11 077)		 17,264
(7831)		 19,101
(8664)		 12,116
(5496)		 17,871
(6745)		 8,838
(4009)		 11,358
(5152)		 6,557
(2974)
Ground Level 27,003
(12 248)		 24,933
(11 310)		 27,623
(12 530)		 16,161
(7331)		 19,411
(8805)		 11,440
(5189)		 14,433
(6547)		 8,436
(3827)		 11,143
(5054)		 6,356
(2883)
-5 ft. (-1.52 m) 25,662
(11 640)		 24,473
(11 101)		 27,191
(12 334)		 15,588
(7071)		 18,937
(8590)		 11,014
(4996)		 14,147
(6417)		 8,174
(3708)		    
-10 ft. (-3.05 m) 28,325
(12 848)		 24,540
(11 131)		 27,018
(12 255)		 15,438
(7003)		 18,768
(8513)		 10,862
(4927)		 14,080
(6387)		 8,111
(3679)		    
-15 ft (-4.57 m) 32,496
(14 740)		 24,977
(11 329)		 25,622
(11 622)		 15,636
(7092)		 18,930
(8587)		 11,008
(4993)		        
-20 ft (-6.10 m) 25,530
(11 580)		 25,530
(11 580)		 19,607
(8894)		 16,245
(7369)		            
 
Click Here to download full brochure
 

 

Contact Us    Site Map