John Deere 328D Skid Steer Specs
 
Engine
Type John Deere PowerTech 5030HT
EPA Interim Tier 4
Displacement 186 cu. in. (3 L)
Cylinders 5
Gross Horsepower 85 gross hp (63.4 kW)
Net Horsepower 80 net hp (59.6 kW)
Torque Rise 43% @ 1,700 rpm
Aspiration Turbocharged and intercooled
Air Cleaner Dry dual element
Fuel Capacity 29 gal. (110.5 L)

 

Electrical System
Alternator Output 12 volt, 70 amp
Battery 12 volt, 925 cca

 

Transmission/Steering
Type Hydrostatic-Servo
Travel Speeds
     Single Speed
     Two Speed, Low
     Two Speed, High
7 mph (11.3 km/h)
7 mph (1.3 km/h)
12 mph (19.3 km/h)

 

Loader Performance
Tipping Load 5,600 lb. (2542 kg)
SAE Rated Operating Capacity 2,800 lb. (1271 kg)
ROC with Optional Counterweights 2,950 lb. (1339 kg)
Boom Breakout 5,000 lb. (2270 kg)
Bucket Breakout 10,300 lb. (4676 kg)

 
Dimensions
A) Length without Bucket 9 ft. 10 in. (2.99 m)
B) Length with Bucket 11 ft. 10 in. (3.60 m)
C) Width without Bucket 6 ft. 5 in. (1.95 m)
D) Height to Top of ROPS 7 ft. 1in. (2.15 m)
E) Height to Hinge Pin 10 ft. 7 in. (3.23 m)
F) Dump Height 8 ft. 5 in. (2.57 m)
G) Dump Reach
        Foundry Bucket
        Construction Bucket
31.3 in. (796 mm)
39 in. (0.98 m)
H) Wheelbase 4 ft. 0 in. (1.23 m)
I) Ground Clearance 11.6 in. (295 mm)
J) Angle of Departure 31 degrees
K) Front Turn Radius 7 ft. 1 in. (2.17 m)
L) Dump Angle (At Full Lift Height) 45 degrees
M) Bucket Rollback (At Ground Level) 35 degrees

 

Operating Weight
Operating Weight 8,400 lb (3814 kg)
 
Click Here to download full brochure
 

 

Contact Us    Site Map