Engine
Type	John Deere PowerTech 4024T meets EPA and CARB emission non-road regulations
Displacement	149 cu. in. (2.4 L)
Cylinders	4
Gross Horsepower	66 gross hp (45.5 kW)
Net Horsepower	62 net hp (42.5 kW)
Torque Rise	26%
Rated Engine Speed	2,800 rpm
Aspiration	Turbocharged
Air Cleaner	Dry dual element
Fuel Capacity	16 gal. (60.6 L)

 

Electrical System
Alternator Output	12 volt, 70 amp
Battery	12 volt, 750 cca

 

Transmission/Steering
Type	Hydrostatic-Manual
System High-Pressure Relief	5,000 psi
Single-Speed Travel Speeds	0 to 6.8 mph (0 to 10.9 km/h)

 

Loader Performance
Tipping Load	3,900 lb. (1769 kg)
SAE Rated Operating Capacity1	1,950 lb. (885 kg)
ROC with Optional Counterweights	2,300 lb. (1043 kg)
Boom Breakout	3,100 lb. (1406 kg)
Bucket Breakout     Foundry Bucket     Construction Bucket	5,500 lb. (2495 kg) 3,900 lb. (1769 kg)
1 Operating capacity rated with standard tires and foundry bucket according to SAE standard J818 operating capacity to equal no more than one half the tip load.

Dimensions
A) Length without Bucket	102 in. (2591 mm)
B) Length with Bucket	125.8 in. (3195 mm)
C) Width without Bucket	69.8 in. (1773 mm)
D) Height to Top of ROPS	76.8 in. (1951 mm)
E) Height to Hinge Pin	115.2 in. (2926 mm)
F) Dump Height	90.2 in. (2290 mm)
G) Dump Reach         Foundry Bucket         Construction Bucket	28.1 in. (714 mm) 35 in. (889 mm)
H) Wheelbase	42.3 in. (1074 mm)
I) Ground Clearance	9.6 in. (244 mm)
J) Angle of Departure	27 degrees
K) Front Turn Radius	78.9 in. (2004 mm)
L) Dump Angle (At Full Lift Height)	45 degrees
M) Bucket Rollback (At Ground Level)	35 degrees

 

Operating Weight
Operating Weight	6,435 lb (2858 kg)