Engine
Type	John Deere PowerTech 4024T meets EPA and CARB emission non-road regulations
Displacement	149 cu. in. (2.4 L)
Cylinders	4
Gross Horsepower	61 gross hp (45.5 kW)
Net Horsepower	57 net hp (42.5 kW)
Torque Rise	31%
Rated Engine Speed	2,800 rpm
Aspiration	Turbocharged
Air Cleaner	Dry dual element
Fuel Capacity	16 gal. (60.6 L)

 

Electrical System
Alternator Output	12 volt, 70 amp
Battery	12 volt, 750 cca

 

Transmission/Steering
Type	Hydrostatic-Manual
System High-Pressure Relief	5,000 psi
Single-Speed Travel Speeds	0 to 6.8 mph (0 to 10.9 km/h)

 

Loader Performance
Tipping Load	3,700 lb. (1678 kg)
SAE Rated Operating Capacity1	1,750 lb. (794 kg)
ROC with Optional Counterweights	2,100 lb. (953 kg)
Boom Breakout	3,100 lb. (1406 kg)
Bucket Breakout     Foundry Bucket     Construction Bucket	5,500 lb. (2495 kg) 3,900 lb. (1769 kg)
1 Operating capacity rated with standard tires and foundry bucket according to SAE standard J818 operating capacity to equal no more than one half the tip load.

Dimensions
A) Length without Bucket	102 in. (2591 mm)
B) Length with Bucket	125.8 in. (3195 mm)
C) Width without Bucket	64.1 in. (1628 mm)
D) Height to Top of ROPS	75.4 in. (1915 mm)
E) Height to Hinge Pin	114 in. (2896 mm)
F) Dump Height	88.8 in. (2255 mm)
G) Dump Reach         Foundry Bucket         Construction Bucket	29.1 in. (739 mm) 36 in. (914 mm)
H) Wheelbase	42.3 in. (1074 mm)
I) Ground Clearance	8.2 in. (208 mm)
J) Angle of Departure	27 degrees
K) Front Turn Radius	78.9 in. (2004 mm)
L) Dump Angle (At Full Lift Height)	45 degrees
M) Bucket Rollback (At Ground Level)	35 degrees

 

Operating Weight
Operating Weight	6,300 lb (2858 kg)