Engine
Type	John Deere PowerTech 4024T certified to EPA interim Teir 4 emissions
Displacement	149 cu. in. (2.4 L)
Cylinders	4
Gross Horsepower	45 gross hp (33.5 kW)
Net Horsepower	49 net hp (36.5 kW)
Torque Rise	32%
Rated Engine Speed	2,400 rpm
Aspiration	Turbocharged
Air Cleaner	Dry dual element
Fuel Capacity	17.5 gal. (66 L)

 

Electrical System
Alternator Output	12 volt, 70 amp
Battery	12 volt, 750 cca

 

Transmission/Steering
Type	Hydrostatic-Manual
System High-Pressure Relief	5,000 psi
Single-Speed Travel Speeds	0 to 6.8 mph (0 to 10.9 km/h)

 

Loader Performance
Tipping Load	3,000 lb. (1362 kg)
SAE Rated Operating Capacity	1,500 lb. (681 kg)
ROC with Optional Counterweights	1,650 lb. (749 kg)
Boom Breakout	3,900 lb. (1771 kg)
Bucket Breakout     Foundry Bucket     Construction Bucket	3,300 lb. (1498 kg) 2,440 lb. (1108 kg)

Dimensions
A) Length without Bucket	8 ft. 5 in. (2.57 m)
B) Length with Bucket	10 ft. 9 in. (3.27 m)
C) Width without Bucket	4 ft. 11 in. (1.50 m)
D) Height to Top of ROPS	6 ft. 5 in. (1.96 m)
E) Height to Hinge Pin	9 ft. 7 in. (2.91 m)
F) Dump Height	7 ft. 5 in. (2.26 m)
G) Dump Reach         Foundry Bucket         Construction Bucket	15.8 in. (401 mm) 21 in. (0.54 m)
H) Wheelbase	3 ft. 5 in. (1.04 m)
I) Ground Clearance	7.6 in. (193 mm)
J) Angle of Departure	23.5 degrees
K) Front Turn Radius	6 ft. 4 in. (1.93 m)
L) Dump Angle (At Full Lift Height)	40 degrees
M) Bucket Rollback (At Ground Level)	30 degrees

 

Operating Weight
Operating Weight	5,200 lb (2361 kg)