Engine
Type	John Deere PowerTech 4024T certified to EPA interim Teir 4 emissions
Displacement	149 cu. in. (2.4 L)
Cylinders	4
Gross Horsepower	45 gross hp (33.5 kW)
Net Horsepower	49 net hp (36.5 kW)
Torque Rise	32%
Rated Engine Speed	2,400 rpm
Aspiration	Turbocharged
Air Cleaner	Dry dual element
Fuel Capacity	17.5 gal. (66 L)

 

Electrical System
Alternator Output	12 volt, 70 amp
Battery	12 volt, 750 cca

 

Transmission/Steering
Type	Hydrostatic-Manual
System High-Pressure Relief	5,000 psi
Single-Speed Travel Speeds	0 to 6.8 mph (0 to 10.9 km/h)

 

Loader Performance
Tipping Load	2,525 lb. (1146 kg)
SAE Rated Operating Capacity	1,260 lb. (572 kg)
ROC with Optional Counterweights	1,400 lb. (636 kg)
Boom Breakout	2,800 lb. (1271 kg)
Bucket Breakout     Foundry Bucket     Construction Bucket	3,300 lb. (1498 kg) 2,178 lb. (989 kg)

Dimensions
A) Length without Bucket	8 ft. 0 in. (2.44 m)
B) Length with Bucket	10 ft. 4 in. (3.14 m)
C) Width without Bucket	4 ft. 11 in. (1.50 m)
D) Height to Top of ROPS	6 ft. 5 in. (1.96 m)
E) Height to Hinge Pin	9 ft. 1 in. (2.77 m)
F) Dump Height	7 ft. 0 in. (2.13 m)
G) Dump Reach         Foundry Bucket         Construction Bucket	17.4 in. (442 mm) 23 in. (0.58 m)
H) Wheelbase	3 ft. 2 in. (0.95 m)
I) Ground Clearance	7.6 in. (193 mm)
J) Angle of Departure	26 degrees
K) Front Turn Radius	6 ft. 2 in. (1.89 m)
L) Dump Angle (At Full Lift Height)	40 degrees
M) Bucket Rollback (At Ground Level)	30 degrees

 

Operating Weight
Operating Weight	5,150 lb (2338 kg)