Engine
Manufacture and Model	John Deere PowerTech  4045T turbocharged standard
Non-Road Emission Standards	certified to EPA Tier 2 emissions
Displacement	276 cu. in. (4.5 L)
Net Peak Power (ISO9249)	92 hp (69 kW) @ 2,000 rpm

 

Hydraulics
Main Pump	pressure-compensated load-sensing (PCLS) axial-piston pump
Pump Flow @ 2,200 rpm      Backhoe      Loader	42 gpm (159 L/min.) 42 gpm (159 L/min.)
System Relief Pressure      Backhoe      Loader	3,625 psi (24 993 kPa) 3,625 psi (24 993 kPa)

 

Electrical
Voltage	12 volt
Alternator Rating	120 amp

 

Tires	Front	Rear
Non-Powered Front Axle	11L-16 SL F-3 (12)	19.5L-24 R-4 (10)
Mechanical-Front-Wheel Drive	12.5/80-18 I-3 (10)	19.5L-24 R-4 (10)

 

Serviceability
Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element, Vertically Mounted	6-micron filtration / 1,000 service hours
Refill Capacities
Cooling System	22 qt. (21 L)
Rear Axle	19 qt. (18 L)
Engine Oil (including vertical spin-on filter)	14 qt. (13 L)
Torque Converter and Transmission	16 qt. (15 L)
Fuel Tank (with ground-leveling fueling)	41 gal. (155 L)
Hydraulic System	24 gal. (91 L)
Hydraulic Reservoir	10.2 gal. (39 L)
Mechanical-Front-Wheel-Drive Housing      Axle      Planetary (each)	7 qt. (6.5 L) 1 qt. (1 L)

 

Operating Weights
Typical with Cab, Extendable Dipperstick,   1,250-lb (567 kg) Counterweight, Full Fuel Tank,   175lb. (79 kg) Operator, & Standard Equipment	17,937 lb. (8134 kg)
Optional Components
Tool Carrier (includes  mechanical-front-wheel-drive)	1,062 lb. (482 kg)
Backhoe Bucket Coupler	138 lb. (63 kg)

Overall Dimensions
A) Ground Clearance (minimum)	13 in. (330 mm)
B) Overall Length (Transport)	23 ft. 6 in. (7.16 m)
C) Width over Tires	7 ft. 2 in. (2.18 m)
D) Height to Top of Rops/Cab	9 ft. 2 in. (2.79 m)
E) Length from Axle to Axle      Non-Powered Front Axle      Mechanical-Front-Wheel-Drive Axle	6 ft. 11 in. (2.11 m) 7 ft. (2.14 m)

 

Backhoe Dimensions / Performance
Digging Force      Bucket Cylinder      Crowd Cylinder	15,236 lb. (67.8 kN) 8,090 lb. (36.0 kN)
	Retracted	Extended
F) Loading Height (truck loading position)	11 ft. 3 in. (3.43 m)	14 ft. 1 in. (4.29 m)
G) Reach from Center of Swing Pivot	18 ft. 7 in. (5.66 m)	21 ft. 11 in. (6.68 m)
H) Reach from Center of Rear Axle	22 ft. 1 in. (6.73 m)	25 ft. 4 in. (7.72 m)
I) Digging Depth (SAE maximum)	14 ft. 11 in. (4.55 m)	18 ft. 5 in. (5.61 m)
J) Digging Depth (SAE)      2-ft. (610 mm) Flat Bottom      8-ft. (2440 mm) Flat Bottom	14 ft. 9 in. (4.50 m) 13 ft. 9 in. (4.19 m)	18 ft. 3 in. (5.56 m) 17 ft. 6 in. (5.33 m)
K) Stabilizer Width (transport with Rops)	7 ft. 2. in. (2.18 m)	7 ft. 2 in. (2.18 m)
L) Stabilizer Spread (operating)      Standard Stabilizers      Long Stabilizers	10 ft. 2 in. (3.10 m) 11 ft. 4 in. (3.45 m)	10 ft. 2 in. (3.10 m) 11 ft. 4 in. (3.45 m)
M) Stabilizer Overall Width (operating)      Standard Stabilizers      Long Stabilizers	11 ft. 7 in. (3.53 m) 13 ft. 3 in. (4.03 m)	11 ft. 7 in. (3.53 m) 13 ft. 3 in. (4.03 m)
N) Bucket Rotation	190 deg.	190 deg.
O) Transport Height	11 ft. 5 in. (3.48 m)	11 ft. 5 in. (3.48 m)

 

Loader Dimensions / Performance
P) Bucket Dump Angle (maximum)	45 deg.
Q) Rollback Angle at Ground Level	40 deg.
Bucket Capacity	Heavy-duty 1.25 cu. yd. (0.96 m3) Bucket
Width	86 in. (2184 mm)
Weight	860 lb. (390 kg)
Breakout Force	10,310 lb. (45.8 kN)
Lift Capacity (full height)	6,625 lb. (3008 kg)
R) Height to Bucket Hinge Pin (maximum)	11 ft. 2 in. (3.40 m)
S) Dump Clearance (bucket at 45 deg.)	8 ft. 3 in. (2.51 m)
T) Reach at Full Height (bucket at 45 deg.)	34.2 in. (868 mm)
U) Digging Depth Below Ground (bucket level)	4.8 in. (122 mm)
V) Length from Front Axle Centerline to      Bucket Cutting Edge	7 ft. 7 in. (2.30 m)

Lift Capacity with Quick-Coupler / Forks
A') Maximum Height	4,875 lb. (2211 kg)
B') Maximum Reach	7,580 lb. (3438 kg)
C') At Ground Line	9,700 lb. (4400 kg)
D') Below Ground Line	8.3 in (211 mm)