Engine
Manufacture and Model	John Deere PowerTech  4045T turbocharged standard
Non-Road Emission Standards	certified to EPA Tier 2 emissions
Displacement	276 cu. in. (4.5 L)
Net Peak Power (ISO9249)	92 hp (69 kW) @ 2,000 rpm

 

Hydraulics
Main Pump	open center, gear type, tandem with unloader
Pump Flow @ 2,200 rpm      Backhoe      Loader	36 gpm (136 L/min.) 28 gpm (106 L/min.)
System Relief Pressure      Backhoe      Loader	3,625 psi (24 993 kPa) 3,625 psi (24 993 kPa)

 

Electrical
Voltage	12 volt
Alternator Rating	90 amp

 

Tires	Front	Rear
Non-Powered Front Axle	11L-16 SL F-3 (12)	19.5L-24 R-4 (10)
Mechanical-Front-Wheel Drive	12.5/80-18 I-3 (10)	19.5L-24 R-4 (10)

 

Serviceability
Hydraulic Oil Filter, Spin-On Enclosed Replaceable Element, Vertically Mounted	6-micron filtration / 1,000 service hours
Refill Capacities
Cooling System	22 qt. (21 L)
Rear Axle	19 qt. (18 L)
Engine Oil (including vertical spin-on filter)	14 qt. (13 L)
Torque Converter and Transmission	16 qt. (15 L)
Fuel Tank (with ground-leveling fueling)	41 gal. (155 L)
Hydraulic System	24 gal. (91 L)
Hydraulic Reservoir	10.2 gal. (39 L)
Mechanical-Front-Wheel-Drive Housing      Axle      Planetary (each)	7 qt. (6.5 L) 1 qt. (1 L)

 

Operating Weights
With Full Fuel Tank, 175-lb. (79 kg) Operator, and Standard Equipment	14,430 lb. (6544 kg)
Typical with Cab, Mechanical-Front-Wheel Drive      Extendable Dipperstick, and 1,000-lb.      (454 kg) Counterweight	16,960 lb. (7691 kg)
Optional Components
Cab	580 lb. (263 kg)
Mechanical-Front-Wheel Drive with Trans	485 lb. (220 kg)
Extendable Dipperstick	490 lb. (222 kg)
Front Loader Coupler	630 lb. (286 kg)
Backhoe Bucket Coupler	138 lb. (63 kg)

Overall Dimensions
A) Ground Clearance (minimum)	13 in. (330 mm)
B) Overall Length (Transport)	23 ft. 6 in. (7.16 m)
C) Width over Tires	7 ft. 2 in. (2.18 m)
D) Height to Top of Rops/Cab	9 ft. 2 in. (2.79 m)
E) Length from Axle to Axle      Non-Powered Front Axle      Mechanical-Front-Wheel-Drive Axle	6 ft. 11 in. (2.11 m) 7 ft. (2.14 m)

 

Backhoe Dimensions / Performance
Digging Force      Bucket Cylinder         with Heavy-Duty Cylinder Option      Crowd Cylinder	11,990 lb. (53.3 kN) 15,236 lb. (67.8 kN) 8,090 lb. (36.0 kN)
	With Standard Backhoe	With Optional Extendable DIpperstick
		Retracted	Extended
F) Loading Height (truck loading position)	11 ft. 3 in. (3.43 m)	11 ft. 3 in. (3.43 m)	14 ft. 1 in. (4.29 m)
G) Reach from Center of Swing Pivot	18 ft. 3 in. (5.56 m)	18 ft. 7 in. (5.66 m)	21 ft. 11 in. (6.68 m)
H) Reach from Center of Rear Axle	21 ft. 9 in. (6.63 m)	22 ft. 1 in. (6.73 m)	25 ft. 4 in. (7.72 m)
I) Digging Depth (SAE maximum)	14 ft. 6 in. (4.42 m)	14 ft. 11 in. (4.55 m)	18 ft. 5 in. (5.61 m)
J) Digging Depth (SAE)      2-ft. (610 mm) Flat Bottom      8-ft. (2440 mm) Flat Bottom	14 ft. 4 in. (4.37 m) 13 ft. 4 in. (4.06 m)	14 ft. 9 in. (4.50 m) 13 ft. 9 in. (4.19 m)	18 ft. 3 in. (5.56 m) 17 ft. 6 in. (5.33 m)
K) Stabilizer Width (transport with Rops)	7 ft. 2. in. (2.18 m)	7 ft. 2 in. (2.18 m)	7 ft. 2 in. (2.18 m)
L) Stabilizer Spread (operating)      Standard Stabilizers      Long Stabilizers	10 ft. 2 in. (3.10 m) 11 ft. 4 in. (3.45 m)	10 ft. 2 in. (3.10 m) 11 ft. 4 in. (3.45 m)	10 ft. 2 in. (3.10 m) 11 ft. 4 in. (3.45 m)
M) Stabilizer Overall Width (operating)      Standard Stabilizers      Long Stabilizers	11 ft. 7 in. (3.53 m) 13 ft. 3 in. (4.03 m)	11 ft. 7 in. (3.53 m) 13 ft. 3 in. (4.03 m)	11 ft. 7 in. (3.53 m) 13 ft. 3 in. (4.03 m)
N) Bucket Rotation	190 deg.	190 deg.	190 deg.
O) Transport Height	11 ft. 6 in. (3.51 m)	11 ft. 5 in. (3.48 m)	11 ft. 5 in. (3.48 m)

 

Loader Dimensions / Performance
P) Bucket Dump Angle (maximum)	45 deg.
Q) Rollback Angle at Ground Level	40 deg.
Bucket Capacity	Heavy-duty 1.25 cu. yd. (0.96 m3) Bucket
Width	86 in. (2184 mm)
Weight	892 lb. (405 kg)
Breakout Force	10,210 lb. (45.4 kN)
Lift Capacity (full height)	7,340 lb. (3332 kg)
R) Height to Bucket Hinge Pin (maximum)	11 ft. 2 in. (3.40 m)
S) Dump Clearance (bucket at 45 deg.)	8 ft. 2 in. (2.48 m)
T) Reach at Full Height (bucket at 45 deg.)	35.9 in. (911 mm)
U) Digging Depth Below Ground (bucket level)	5.8 in. (147 mm)
V) Length from Front Axle Centerline to      Bucket Cutting Edge	7 ft. 2 in. (2.18 m)

Lift Capacity with Quick-Coupler / Forks
A') Maximum Height	4,570 lb. (2073 kg)
B') Maximum Reach	6,971 lb. (3162 kg)
C') At Ground Line	9,138 lb. (4145 kg)
D') Below Ground Line	8.3 in (211 mm)