John Deere 244J Wheel Loader Specs
 
Engine
Type John Deere PowerTech 4024T
complies with EPA Tier 2 emissions
Cylinders 4
Valves per Cylinder 2
Displacement 147 cu. in. (2.4 L)
Net Peak Power (ISO9249) 64 hp (48 kW) @ 2,600 rpm
Net Peak Torque (ISO9249) 163 lb. ft. (221 Nm) @ 1,600 rpm
Aspiration turbocharged
Air Cleaner dual element dry type; restriction indicator
Fan Drive hydraulically driven, proportionally controlled
Electrical System 12 volt with 65-amp alternator
Batteries (two 12 volt) 850 CCA (dual batteries standard)

 

Transmission
Travel Speeds
        Gear 1
        Gear 2		 Forward
4.3 mph (7.0 km/h)
18.6 mph (30.0 km/h)

 

Refill Capacities
Fuel Tank (with ground level fueling) 21 gal. (80 L)
Cooling System 10.6 qt. (10 L)
Engine Oil, Including Full Flow Spin On Filter 9 qt. (8.5 L)
Loader Hydraulic and Hydrostatic Reservoir with Filter 16 gal. (60 L)
Axles
     HST Motor Gearbox
     Front Differential
     Rear Differential
     Other Hubs (each)
0.8 qt. (0.7 L)
4.2 qt. (4.0 L)
4.3 qt. (4.1 L)
1.0 qt. (0.9 L)

 

Hydraulic System / Steering    
Maximum Lift Capacity 1.0 cu. yd. (0.8 m3) bucket with bolt-on edge
     Lift at Ground Level
     Lift at Maximum Height		 9,892 lb (4487 kg)
6,407 lb (2906 kg)

 
Dimensions (with Quick Coupler/Bucket)  
A) Height to Top of Cab 8 ft. 11 in. (2725 mm)
B) Height to Top of Exhaust 8 ft. 6 in. (2600 mm)
C) Ground Clearance 11.6 in. (295 mm)
D) Length from Centerline to Front Axle 29.5 in. (750 mm)
E) Wheelbase 84.6 in. (2150 mm)
F) Dump Clearance see below
G) Height to Hinge Pin, Fully Raised 10 ft. 6.4 in. (3211 mm)
H) Dump Reach at Full Height see below
I) Maximum Digging Depth 3.1 in. (80 mm)
J) Overall Length see below
K) Maximum Rollback at Full Height 52 degrees
L) Bucket Dump at Full Height 42 degrees
M) Maximum Rollback at Ground Level 39 degrees
 
Quick Coupler Bucket Information
Bucket Type/Size General Purpose Bucket w/ Bolt on Edge
Capacity, Heaped SAE 1.0 cu. yd. (0.8 m3) 1.4 cu. yd. (1.1 m3)
Capacity, Struck SAE 0.86 cu. yd. (0.66 m3) 1.18 cu. yd. (0.9 m3)
Bucket Weight 736 lb (334 kg) 945 lb (429 kg)
Bucket Width 74.8 in. (1900 mm) 86.6 in. (2200 mm)
Breakout Force, SAE J732C 10,792 lb (4895 kg) 9,722 lb (4410 kg)
Tipping Load, Straight 8,457 lb (3836 kg) 8,347 lb (3786 kg)
Tipping Load, Full Turn, SAE 7,718 lb (3501 kg) 7,617 lb (3455 kg)
Reach, 42-Degree Dump, 7 ft (2.13 m) Clearance 46 in. (1170 mm) 46.9 in. (1190 mm)
Reach, 42-Degree Dump, Full Height 32.2 in. (818 mm) 34 in. (863 mm)
Dump Clearance, 42-Degree  Full Height 100.4 in. (2550 mm) 98.8 in. (2510 mm)
Overall Length, Bucket on Ground 17 ft. 4 in. (5295 mm) 17 ft. 2.1 in. (5235 mm)
Loader Clearance Circle, Bucket in Carry Position 24 ft. 2.6 in. (7380 mm) 24 ft. 10 in. (7570 mm)
Operating Weight 11,552 lb (5240 kg) 11,817 lb (5360 kg)

 

 

Dimensions (with Quick-Coupler and Pallet Fork)
A) Reach, Fully Raised 1 ft. 9.7 in. (550 mm)
B) Fork Height, Fully Raised 9 ft. 11.6 in. (3039 mm)
C) Maximum Reach, Fork Level 4 ft. 1.5 in. (1258 mm)
D) Fork Height, Maximum Reach 4 ft. 9.2 in. (1452 mm)
E) Reach, Ground Level 2 ft. 5.2 in. (741 mm)
F) Depth Below Ground 2.0 in. (50 mm)
G) Tine Length 47.2 in. (1200 mm)
H) Overall Length 19 ft. 0.5 in. (5805 mm)

 

Quick Coupler Pallet Fork Information
Tipping Load, Straight (fork level, load centered on tine) 6,404 lb (2905 kg)
Tipping Load, Full Turn (fork level, load centered on tine) 5,846 lb (2652 kg)
Operating Weight 11,398 lb (5170 kg)
 
Click Here to download full brochure
 

 

Contact Us    Site Map