John Deere 220DW Specs

John Deere 220D W Excavator Specs

Engine
Type	Isuzu 4HK1X
Non Road Emission Standard	certified to EPA Tier 3 emissions
Net Power (ISO 9249)	159 hp (119 kW)
Displacement	317 cu. in. (5.2 L)
Aspiration	turbocharged and intercooled

Operating Weights
Full Fuel Tank, 175 lb Operator; 0.92 cu yd, 35 in. 1,345 lb Bucket; 9 ft. 7 in. Arm; 8,929 lb Counterweight;
Front Blade and Rear Outrigger	49,207 lb (22 320 kg)

Operating Dimensions

Arm Length
Arm Force	22,930 lb (101.9 kN)
Bucket Digging Force	29,000 (128.9 kN)
Lifting Capacity Over Front at Ground Level 20 ft. (6.1 m) Reach	16,190 lb (7344 kg)
A) Maximum Reach	33 ft. 4 in. (10.17 m)
A')Maximum Reach at Ground Level	32 ft. 8 in. (9.96 m)
B) Maximum Digging Depth	20 ft. 8 in. (6.29 m)
B')Maximum Digging Depth at 8 ft. Flat Bottom	20 ft. 1 in. (6.11 m)
C) Maximum Cutting Height	33 ft. 5 in. (10.19 m)
D) Maximum Dumping Height	24 ft. 1 in. (7.35 m)
E) Minimum Swing Radius	11 ft. 3 in. (3.43 m)
F) Maximum Vertical Wall	18 ft. 4 in. (5.60 m)
G) Tail Swing Radius	9 ft. 0 in. (2.75 m)

Machine Dimensions	9 ft. 7 in. (2.91 m) Arm
A) Overall Length	31 ft. 10 in. (9.70 m)
B) Height Over Boom	9 ft. 10 in. (2.99 m)
C) Rear-End Swing Radius	9 ft. 0 in. (2.75 m)
D) Engine Cover Height	8 ft. 3 in. (2.52 m)
E) Counterweight Clearance	4 ft. 0 in. (1.23 m)
F) Overall Width of Upperstructure	8 ft. 1 in. (2.47 m)
G) Overall Height of Cab	10 ft. 5 in. (3.17 m)
H) Overall Width of Tires	8 ft. 11 in. (2.73 m)
J) Minimum Ground Clearance	13 in. (0.33 m)
K) Wheelbase	9 ft. 0 in. (2.75 m)
L) Swing Center to Rear Axle	4 ft. 3 in. (1.30 m)
M) Front Overhang	4 ft. 5 in. (1.36 m)
N) Rear Overhang	3 ft. 7 in. (1.09 m)
O) Maximum Blade Lower	8 in. (0.22 m)
P) Overall Height of Blade	24 in. (0.60 m)
Q) Maximum Blade Raise	15 in. (0.37 m)
R) Overall Width of Blade	8 ft. 4 in. (2.53 m)
S) Overall Width with Outrigger Retracted	8 ft. 1 in. (2.47 m)
T) Overall Width with Outrigger Extended	11 ft. 3 in. (3.44 m)
V) Overall Height of Boom	13 ft. 1 in. (4.00 m)
W) Front Overhang	11 ft. 6 in. (3.50 m)

Lift Capacities
Boldface italic type indicates hydraulic-limited capacities; lightface type indicates stability-limited capacities, in lb. (kg). Ratings are at bucket lift hook, using 0.37 cu. yd. bucket, 15 ft. 1 in. (4.6 m) boom, standard gauge, situated on firm, uniform supporting surface. Figures do not exceed 87 percent of hydraulic capacity of 75 percent of weight needed to tip machine.
Load Point Height	10 ft. (3.05 m)		15 ft. (4.57 m)		20 ft. (6.10 m)		25 ft. (7.62 m)		30 ft. (9.14 m)
Load Point Height	Over Front	Over Side	Over Front	Over Side	Over Front	Over Side	Over Front	Over Side	Over Front	Over Side
With monoblock boom and rear outriggers and front blade down
25 ft. (7.62 m)					6,811 (3089)	6,811 (3089)
20 ft. (6.10 m)					8,666 (3931)	8,666 (3931)	8,199 (3683)	8,199 (3683)
15 ft. (4.57 m)					9,977 (4525)	9,977 (4525)	9,355 (4243)	9,355 (4243)
10 ft. (3.05 m)			16,422 (7449)	16,422 (7449)	12,223 (5544)	12,223 (5544)	10,365 (4701)	9,454 (4288)
5 ft. (1.52 m)			21,418 (9715)	20,122 (9127)	14,594 (6620)	12,917 (5859)	11,549 (5239)	9,125 (4139)	7,843 (3558)	6,771 (3071)
Ground Level			23,383 (10 606)	19,465 (8829)	16,190 (7344)	12,452 (5648)	12,442 (5644)	8,864 (4021)
-5 ft. (-1.52 m)	13,824 (6270)	13,824 (6270)	23,032 (10 447)	19,348 (8776)	16,584 (7522)	12,254 (5558)	12,636 (5732)	8,738 (3963)
-10 ft. (-3.05 m)	22,679 (10 287)	22,679 (10 287)	21,063 (9554)	19,509 (8849)	15,576 (7065)	12,293 (5576)	11,494 (5214)	8,808 (3995)
-15 ft (-4.57 m)			16,922 (7676)	16,922 (7676)	12,226 (5546)	12,226 (5546)