| Engine |
| Manufacture and Model |
John Deere PowerTech E 4045HT
turbocharged |
| Non-Road Emission Standards |
certified to EPA
Tier 3 emissions |
| Displacement |
276 cu. in. (4.5
L) |
|
Net Peak Power |
84 hp (62.6 kW) @ 2,000 rpm |
|
Net Peak Torque |
270 lb ft (367 nM) @ 1,300 rpm |
|
Lubrication |
pressure system with spin on
filter and cooler |
|
Air Cleaner |
dual stage dry type with safety
element and evacuator valuve |
| Hydraulics |
| Main Pump |
open center,
single-gear pump |
Pump Flow @ 2,250 rpm
Hitch
Loader |
25.3 gpm (96 L/min.)
25.3 gpm (96 L/min.) |
| System Relief Pressure |
2,750 psi (18 961 kPa) |
| Electrical |
| Voltage |
12 volt |
| Alternator Rating |
70 amp |
| Tires |
Front |
Rear |
| Mechanical-Front-Wheel Drive |
12-16.5,
8 PR |
16.9-24, 8 PR R4 |
| Serviceability |
| Hydraulic Oil Filter, Spin-On
Enclosed Replaceable Element, Vertically Mounted |
6-micron
filtration / 1,000 service hours |
|
Refill Capacities |
|
| Cooling System |
26.4
qt. (25 L) |
| Rear Axle |
19
qt. (18 L) |
| Engine Oil (including vertical
spin-on filter) |
14
qt. (13 L) |
| Torque Converter and
Transmission |
14.7
qt. (13.9 L) |
| Fuel Tank (with
ground-leveling fueling) |
27
gal. (102.2 L) |
| Hydraulic System |
16.3
gal. (61.5 L) |
| Hydraulic Reservoir |
10.2 gal. (39 L) |
Mechanical-Front-Wheel-Drive
Housing
Axle
Planetary (each) |
7 qt. (6.5 L)
1 qt. (1 L) |
| Operating Weights |
| With Full Fuel Tank, 175-lb.
(79 kg) Operator, and Standard Equipment |
9,130 lb (4140 kg) |
|
Typical with Canopy,
Mechanical-Front-Wheel Drive, Single Battery, 2x4 valve,
1.125 cu. yd. (0.86 m3) Loader Bucket, 1,000
lb (454 kg) Wheel Weights, Deluxe Electrical, and 84 in
(2134 mm) Box Blade |
13,710 lb (6217 kg) |
|
Optional
Components |
|
| Cab |
800
lb. (363 kg) |
|
| Overall Dimensions |
| A) Ground Clearance (minimum) |
11.3 in. (287 mm) |
| B) Overall Length, Transport
(without box blade) |
17 ft. 2 in. (5.23 m) |
C) Transport Height
Canopy
Cab |
8 ft. 4 in. (2.54 m)
8 ft. 8 in. (2.64 m) |
|
D) Length from Axle to Axle
(mechanical front wheel drive axle) |
6 ft. 11 in. (2.12 m) |
|
E) Width over tires |
7 ft. 0 in. (2.13 m) |
| Loader Dimensions / Performance |
|
F) Bucket Dump Angle, Maximum |
45 degrees |
|
G)
Rollback Angle at Ground Level |
40 degrees |
| |
Heavy Duty Long Lip |
Heavy Duty Long Lip |
Multipurpose |
|
Bucket Width |
86 in. (2184 mm) |
86 in. (2184 mm) |
86 in. (2184 mm) |
|
Bucket Capacity |
1.0 cu. yd. (0.77 m3) |
1.12 cu. yd. (0.86 m3) |
1.12 cu. yd. (0.86 m3) |
|
Breakout Force |
7,900 lb (35.1 kN) |
7,750 lb (34.5 kN) |
6,900 lb (30.7 kN) |
|
Lift Capacity, Full Height |
5,280 lb (2397 kg) |
5,100 lb (2315 kg) |
4,600 lb (2088 kg) |
|
H) Height to Bucket Hinge Pin,
maximum |
10 ft. 11 in. (3.34 m) |
10 ft. 11 in. (3.34 m) |
10 ft. 11 in. (3.34 m) |
|
I) Dump Clearance, Bucket at 45
deg. |
8 ft. 9 in. (2.67 m) |
8 ft. 9 in. (2.67 m) |
8 ft. 9 in. (2.67 m) |
|
J) Reach at Full Height, Bucket at
45 deg |
36 in. (914 mm) |
36 in. (914 mm) |
36 in. (914 mm) |
|
K) Digging Depth Below Ground,
Bucket Level |
8 in. (203 mm) |
8 in. (203 mm) |
8 in. (203 mm) |
|
L) Length from Front Axle
Centerline to Bucket Cutting Edge |
6 ft. 8 in. (2.03 m) |
6 ft. 8 in. (2.03 m) |
7 ft. 1 in. (2.15 m) |
|
